Touchpad - HP Compaq Presario,Presario V3501 Maintenance And Service Manual

TouchPad

Description
TouchPad for use only in computer models with Intel processors (includes TouchPad bracket and
TouchPad cable)
TouchPad for use only in computer models with AMD processors (includes TouchPad bracket and
TouchPad cable)
Before removing the TouchPad, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
WLAN cover (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
Remove the TouchPad:
Turn the top cover upside down, with the front toward you.
1.
Remove the five Phillips PM2.0×3.0 screws (1) that secure the TouchPad assembly to the top cover.
2.
Battery on page 46).
Hard drive on page 47)
WLAN module on page
Optical drive on page
Keyboard on page 59)
Switch cover on page
Display assembly on page
Top cover on page 70)
50)
57)
62)
64)
Component replacement procedures
Spare part number
451341-001
455858-001
73