Computer Feet; Memory Module - HP 530 Maintenance And Service Manual

Computer feet

Description
Rubber Feet Kit
The computer feet are adhesive-backed rubber pads. There are 8 rubber feet. The feet attach to the base
enclosure in the locations illustrated below.

Memory module

Description
1024-MB, 667-MHz, PC2-5300, 1-DIMM
512-MB, 667-MHz, PC2-5300, 1-DIMM
256-MB, 667-MHz, PC2-5300, 1-DIMM
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the external memory module:
Position the computer with the rear panel toward you.
1.
Loosen the Phillips PM2.5×6.0 screw (1) that secures the memory/WLAN module compartment
2.
cover to the computer.
Battery on page 32).
Spare part number
438557-001
Spare part number
409060-001
447518-001
447517-001
Component replacement procedures 35