Huawei DBS3900 Hardware Description page 13

DBS3900
RRU3253 Hardware Description
Label
ACT
VSWR
CPRI0/
IR0
CPRI1/
IR1
Issue 01 (2012-11-30)
Color Status
Steady off
Blinking on for 1s and off
for 1s
Green Steady on
Blinking on for 1s and off
for 1s
Red Steady off
Steady on
Red or Steady green
green
Steady red
Blinking red on for 1s and
off for 1s
Steady off
Red or Steady green
green
Steady red
Blinking red on for 1s and
off for 1s
Steady off
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 RRU Introduction
Description
No alarm is generated.
Alarms are generated. The alarms
may be caused by the faults on the
related modules or ports. Therefore,
the necessity for module replacement
is uncertain.
The module is working properly with
TX channels enabled or software is
being loaded without RRU running.
The module is working properly with
TX channels disabled.
No VSWR alarm is generated.
A VSWR alarm is generated.
The Ir link is functioning properly.
An optical module fails to transmit or
receive signals possibly because the
optical module is faulty or the optical
fiber cable is broken.
The Ir link is out of lock possibly
because of mutual lock of dual-mode
clock sources or mismatched data
rates over Ir ports. (You are advised
to check the system configuration to
rectify the fault.)
The SFP module is not properly
installed, or the optical module is
powered off.
The Ir link is functioning properly.
An optical module fails to transmit or
receive signals possibly because the
optical module is faulty or the optical
fiber cable is broken.
The Ir link is out of lock possibly
because of mutual lock of dual-mode
clock sources or mismatched data
rates over Ir ports. (You are advised
to check the system configuration to
rectify the fault.)
The SFP module is not properly
installed, or the optical module is
powered off.
6