Toshiba TD-BK100GH Series Owner's Manual page 10

INSTALLATION
If you want to install the drying support, first clamp the support on the door filter,then
hook it in the front support slot(as shown below).
door filter
Note!
Drying support is mainly used for
like hats,shoes, plush toys etc. Warm program is recommended for this
function and if items are not completely dried once, you can restart the
program to complete dryness. All items dried with support must meet the
warning requirement of Page 5.Leather products also cannot be dried.
Transport
Move cautiously. Do not grasp any salient parts of machine. The machine door cannot
be used as the handle for transport. If the dryer can't be transported erectly, the dryer
can be tilted to right less than 30°.
Risk of injury and damage!
Improper handling of the appliance may result in injury.
• This appliance should only be transported by two or more people holding the
appliance aecurely.
• Remove all obstacles on the transport route and from the installation location, e.g.
open doors and clear away objects lying on the floor.
• Do not use the open door as a handhold.
• Remove all package material before using the appliance.
• Before setting up the tumble dryer, check it for any externally visible damage.
Do not install or use a damaged tumble dryer.
• Do not install the tumble dryer in a room where there is a risk of frost occurring.
At temperatures around freezing point the tumble dryer may not be able to operate
properly. There is a risk of damage if the condensed water is allowed to freeze in the
pump and hoses.
front support slot
items that is not suitable for tumble dry,
9