Table of Contents
Advertisement
P-BOOK
y LIST
Checks the list of the phone numbers
saved by phonebook.
y SEARCH
Searches the phone number in the list.
y GET
Getting the phonebook from the phone
automatically. This menu is only available
on phones with PBA / PBAP (Phone Book
Access Profile).
CONNECT
y LIST
Checks the list of the Connected Device
Name.
y SEARCH
Searches the phones available to
connect. The Connected Device Name
is displayed on the top.
SETUP
y VISIBLE
Makes it is impossible to search this unit.
(SHOWN <-> HIDDEN)
y AUTO CON
Adjusts connection with automatically
or not. (ON <-> OFF)
y AUTO ANS
Adjusts answering automatically or not.
(MANUAL <-> AUTO)
y MIC VOL
Adjusts microphone volume on the
phone from 1 to 5. While you are on
the phone with Bluetooth wireless
technology, press Y/U (or c /
v on the remote control) to adjust
the MIC volume.
y REDIAL
Adjusts the counts of redial. (1 TIME <->
2 TIMES)
INFO
y NAME
Changes the name of this unit.
y ADDRESS
Checks the address.
y PIN-CODE
Changes the PIN code. Default is 1234.
WICS (Wireless Controller &
Synchronization)
You can control the unit by using the
"WICS" application.
1. Search the "WICS" application and
install it.
[Displays installed "WICS" application]
2. Pairing links your unit and iPhone with
Bluetooth wireless technology. (Refer
to the page 15.)
3. When you run the "WICS" application,
activating source is displayed after
initial screen. Then you can control the
unit on iPhone.
Operating
17
[Initial screen]
[Tuner screen]
You can select a source by pressing
"SOURCE".
[Source Mode screen]
3
Advertisement
Table of Contents
