Table of Contents
Advertisement
Setting network preferences
(9) Tap [Enter].
The Network Setup screen appears again.
Tip
While inputting password characters, they are visible as they are. However,
after it has been entered, each character is indicated as "∗". If you enter your
password again, delete all "∗" before entering the password.
(10) Tap [Exit].
The setup of the DI customer ID and password are complete, and the Setup
screen appears again.
Setting your provider preferences
When using "So-net" carry out the following procedures:
"1 "So-net" setting"
"2 Entering the telephone numbers of your access points"
"4 Setting network options preferences"
When using the other provider, carry out the following procedures:
"3 Setting your provider preferences manually"
"4 Setting network options preferences"
Tip
Even if you do not set up the items described in "4 Setting network options
preferences," you can access the Internet by using the default setting.
Tip on password
When you check the item "Verify Password" on the Network Options screen, you have
to enter your password whenever you connect to your Internet service provider. For
details, see " 4 Setting network options preferences"
36
,
DCR-TRV50 Network 3-074-603-11(1).US
Advertisement
Table of Contents
