Basic Operations; About The Current Position Screen; To Change The Map Scale; To Change The Map View - JVC KW-NT500HDT Instructions Manual

Basic operations

About the current position screen

Favorite points (☞ pages 17 and 34)
POI (Point Of Interest)
(☞ "List of POI icons",
page 43)
Home (☞ pages 17
and 34)
Traffic information
(only for KW-NT500HDT)
(☞ page 35)
Shows the quick menu (☞ page xx)

To change the map scale

1
Display the zoom buttons and scale buttons.
• When the AV control bar is displayed, the zoom
buttons are not shown. Erase the AV control
bar by pressing the source icon on the bar.
(☞ page 12)
2
You can also zoom in and out by sliding
• If the scale is set to 60 mi (100 km) or higher, the
map view becomes North Up regardless of the
current map view setting.
EN_KW-NT500HDT_NT300[J].indb 19 EN_KW-NT500HDT_NT300[J].indb 19
Your position
Current street

To change the map view

Zoom in
the slider.
• You can also change the map view through
Zoom out
<Settings>-<Navigation>-<Map>-<View
Mode>. (☞ page 41)
19
Current time
Direction
Scale
Zoom buttons
(☞ below)
Shows the AV control
bar (☞ page 12)
Speed limit on the current street
3D Map
The three dimensional map is displayed in
"heading up".
• The icon shows the direction of north.
2D North Up
The map view is oriented with north
"upwards", as in usual paper maps.
• The icon shows the direction of the car.
2D Heading Up
The map rotates so that you are always
displayed heading "upwards".
• The icon shows the direction of north.
12/7/2011 1:06:02 PM 12/7/2011 1:06:02 PM