Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony DCRPC120 Operating Instructions Manual

Step 1 Preparing the power supply

Installing the battery pack

(1) While sliding BATT RELEASE in the direction of the arrow 1, slide the
battery terminal cover in the direction of the arrow 2.
(2) Insert the battery pack in the direction of the arrow until it clicks.
1 2
2
1
To remove the battery pack
The battery pack is removed in the same way as the battery terminal cover.
Note on the battery terminal cover
To protect the battery terminals, install the battery terminal cover after the battery pack
is removed.
12