Removing/Changing Over The Sealing Mat; Side-By-Side Installation - Bosch B30IR800SP/01 Installation Instructions Manual

en-us

Removing/changing over the sealing mat

Freezers are fitted with a sealing mat at the factory for

side-by-side installation.

If a single appliance is installed, the sealing mat is not
required and can be removed.
The sealing mat is essential for side-by-side installation.
If the door hinges were fitted to the other side of the
door, the sealing mat must be attached to the other
appliance.
Always attach sealing mat to the right side of the
appliance situated on the left.
26
Side-by-Side installation
If a Side-by-Side installation is intended, now connect
the two appliances together.
1. Screw the hinge halves in the Side-by-Side kit to
both appliances.
2. Push the appliances together until the hinge
halves interlock.
3. Insert pins into the hinges.