Table of Contents
Advertisement
DYNAMICS
Each input channel has both a GATE and a COMP. The output
channels only have a COMP. When a DYNAMICS switch or encoder
is moved, the LCD shows the relevant GATE or COMP screen. Gain
Reduction meters and Key-In status can also be viewed here. Usefully,
the COMP can be positioned pre-eq, pre-fader (post-eq) or post-fader.
PAN
The PAN and SURROUND PAN settings of the selected input channel
can be edited here (Output channels do not have Pan). The L and R
switches show if the channel is the Left or Right side of a stereo pair.
The Joystick is not active until a surround mode is selected. To do this,
press the PAN/SURROUND DISPLAY switch so the SURR MODE
page is shown. Then choose the SURROUND MODE: 3-1 or 5.1 or
6.1. This will then convert some of the buses (1-8) into Surround
Buses.
9 02R96-v2 Quick Start Guide
Advertisement
Table of Contents
