Table of Contents
Advertisement
3
plUS
8
START/ReSeT
9
ChIld lOCK
10
• A wash program must be selected only before starting an operation, and the selected program can not
be changed during an operation.
• If you want to change the program after starting an operation, open the door and press the Start/Reset
button for 3 seconds to reset the selected program .Then, change the program.
• As this dishwasher is a built-in model, you cannot use any buttons while the door is closed. To use any
of the buttons, first open the door.
• Each time you press the plUS button, the indicator icon will flash in the following sequence: "Additional
Rinse +1 (7 min)" "Additional Rinse +2 (14 min)" "Additional Rinse +1, Additional Dry (37 min)"
"Additional Rinse +2, Additional Dry (44 min)" "Additional Dry (30 min)". The total processing time will
increase as much as the selected additional function.
-
For the Eco program, the processing time will increase by 5, 10, 20 minutes and back to 10 minutes
in sequence.
-
For the Quick program, the "Additional Dry" option is not available so the total processing time will
remain unchanged.
-
For the Prewash program, the PLUS option will be disabled.
UserManual-DMS400TH_EN.indd 15
10
6
4
5
7
Use the plus button to add the drying and rinse cycles to the original course.
If the program has already started, this button is deactivated.
Press this button to start the selected program.
When the door is opened while the dishwasher is operating, the Pause
function is activated.
If you want to reset the selected program, open the door and press the
Start/Reset button for 3 seconds.
The Child Lock function allows you to lock the buttons so that the wash cycle
you've chosen can't be changed.
If you want to activate or deactivate the Child Lock function, press the
Sterilization button for 3 seconds. All buttons will be locked and "L" will be
displayed when this feature is activated.
8
9
setting up your dishwasher _15
1/27/2012 5:10:03 PM
Advertisement
Table of Contents
