Table of Contents
Advertisement
Section 4 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection:
Select PPPoE.
WAN Service Type:
Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are configuring your connection manually and your ISP
has not specified this setting, selecting INTERNET is recommended.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Connection Type:
Select PPPoE LLC or PPPoE VC-Mux.
If you selected Static IP Address, the following option is available:
Static IP Address:
Enter the IP address provided by your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:
Select None or Default Route.
NAT Enable:
Enable or disable Network Address Translation.
Authentication
Select the authentication protocol your ISP uses. The options are
Protocol:
Auto, PAP, or CHAP.
D-Link DSL-3788 User Manual
PPPoE
33
Advertisement
Table of Contents
