Wired Setup Wizard - D-Link DAP-1620B1 User Manual

Section 3 - Configuration
The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1620
AC1300 Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wired setup process. To set your
DAP-1620 wirelessly, please refer to "Wireless Setup Wizard" on page 16
To access the setup utility for the DAP-1620 AC1300 Wi-Fi Range Extender on your
PC, connect an Ethernet cable from a LAN port in your router to LAN port located
on the bottom of the DAP-1620. Then open a web browser and enter http://
dlinkap.local./ in your browser's URL field. You may also enter the IP address* of
the DAP-1620.
* The default IP address is 192.168.0.50. Once your DAP-1620 connects to the host network,
it will be assigned a new IP address based on your network's DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1620. For multiple
DAP-1620s, go to http://dlinkapxxxx.local. as shown on the included Wi-Fi Configuration
Card, with "xxxx" being the last four digits of the DAP-1620's MAC address.
Agree to the Terms of Use and Privacy Policy to continue.
D-Link DAP-1620 User Manual

Wired Setup Wizard

23