LG F2V9GCP Series Owner's Manual page 32

Installing LG ThinQ
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
Wi-Fi Function
Communicate with the appliance from a
smartphone using the convenient smart features.
Washer Cycle
(Remote Start, Download Cycle)
Set or download any preferred cycle and operate by
remote control.
Tub Clean Coach
This function shows how many cycles remain
before running the Tub Clean cycle.
Energy Monitoring
Check the energy consumption of the recently used
cycles and monthly average.
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Various functions are available.
Push Alert
This function is to notify the status notification so
that the user can recognize the appliance status.
The notifications are triggered even if the LG ThinQ
application is off.
32
NOTE
• If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
• The application is subject to change for
appliance improvement purposes without notice
to users.
• Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle operation
so you know how much time is left in the cycle.
Using This Function
1
Press the Power button.
2
Put the laundry into the drum.
3
Press and hold Remote Start button for 3
seconds to enable this function.
4
Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• Once this function is enabled, you can start
a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• When this function is turned on, the door is
automatically locked.
Disabling This Function
When this function is activated, press and hold
Remote Start button for 3 seconds to disable this
function. This function must be turned off, so that
the appliance can be used manually.
EN