Problem Solving - Zanussi ZOFR5003 Manual

My appliance does not work when I turn it on:
1. Check that your appliance is plugged in, the power is turned
on at the mains socket and the power switch on the side of
the unit is powered unit.
2. Try another mains socket.
3. Check the appliance is in an upright position.
4. Check that the temperature setting has not been set too
low.
5. Check if the Overheat protection has operated by leaving
the appliance plugged in, power on and giving it time to cool
down. The heater should start to resume operating
normally.
6. If the appliance still doesn't work, do not try to repair it
yourself.
If your appliance power is automatically cut off, follow the step
below:
1. Unplug your appliance from the mains socket and allow it to
completely cool down.
2. Inspect your appliance. Clean the air inlet and air outlet with
a vacuum cleaner if necessary. If there are any signs of
physical damage (e.g. melting, or burning of the case), do
not attempt to use the appliance. Please leave all
maintenance work to qualified personnel.
3. Plug in the appliance and switch it on again. If it cuts off
again, move the appliance to a better ventilated location.

PROBLEM SOLVING

Page 15