Table of Contents
Advertisement
32
Installation
PTZ
Settings for the PTZ cameras connected via the data port of the
RS-485 terminal.
3
•
Channel: Selects the desired channel to set the connected PTZ
camera.
•
Port: Selects the connected data port of the RS-485 terminal
on the rear panel. The DATA 2 port is used to control the PTZ
camera connected to DVR or to control by using the LKD1000
controller. If you want to use the PTZ camera via DATA 2 port,
you should set the [Remote Controller ID] to [NONE]. If you use
the LKD1000 controller to control the DVR via DATA 2 port, you
should set the [Remote Controller ID] number between 1 and
16.
•
Control ID: Selects the PTZ camera ID. Make the same settings
as the PTZ camera.
•
Protocol: Selects the protocol supported by PTZ camera.
•
Baud Rate: Selects the communication speed.
•
PTZ Test: After the PTZ setting, you can test the pan/tilt function
for the selected PTZ camera. You can see the test screen from
the preview windows on the right side of the PTZ test option.
-
a/d: Tests the pan direction.
-
w/s: Tests the tilt direction.
NOTE
The supported PTZ camera list is on page 76 for reference.
IP Device
•
Channel: Selects the desired channel to set the connected IP
device.
•
Vendor: Selects the IP device vendor from the drop-down list.
•
Stream: Selects the camera stream you want to display using
the Stream drop-down box.
•
Host Name: Enter the IP address of the IP device.
•
User Name: Enter the user ID.
•
Password: Enter the user password.
•
RTSP Port: Enter the RTSP port number.
•
HTTP Port: Enter the HTTP port number.
•
Test: Select [Test] to test the connection with the IP device.
NOTE
•
The Supported IP camera specifications.
Specification
Vendor
LG, AXIS
Recording mode
Continuous, Instant, Motion
Video Codec
H.264, MPEG4, MJPEG
Audio recording and
Support
playback
Resolution
CIF, Half D1(2CIF), D1(4CIF), UXGA,
720p, 1080p (Up to 2048 x 1536)
Stream
LG (Master-0, Slave-0)
AXIS (H.264, MPEG4, MJPEG)
PTZ
Support
Sensor/Motion input
Motion only
Description
Advertisement
Table of Contents
