Table of Contents
Advertisement
Fitting the frame cover
Slide the frame cover up.
1.
Thread the mains power cable through the
Note:
opening in the frame cover and, if necessary,
carefully pull it down.
Fit the frame cover onto the four bolts at the edge of
2.
the frame.
Slide the frame cover approx. 5 mm to the
Note:
right until you hear it click into place.
Tighten the bolts at the edge of the frame.
3.
Secure the covers to the magnets to hide the bolts
4.
at the edges of the frame.
Attaching and aligning the appliance
Manually open the cable tensioners until the cable
1.
can be inserted in it. Do not use any tools.
Do not open the cable tensioners fully. The
Note:
cable tensioners may fall into the appliance.
Enlist the help of a second person to lift the
2.
appliance and thread the cables into the cable
tensioners on the top of the appliance.
Never shorten the cables.
Note:
Taking care to comply with the safety clearances,
3.
slide the appliance up and level it.
If you need to position the appliance lower down, lift
4.
it up
¨
, push the cable tensioners down
the cables back out of the cable tensioners
After aligning, tighten the cable tensioners so that
5.
they are hand-tight. Do not use any tools.
Installation en
©
and pull
.
ª
15
Advertisement
Table of Contents
