Advertisement

Quick Links

Acer Projector
PL1620n/PL1520i/PL1325W/PL1320W/PL1220/
SL1520i/SL1320Wn/SL1220n/
FL162/FL152/FL221A/FL122/FL112/FL152S/
FL122S/FL112S/
LU-P200U/LU-P200F/LU-P500WA/LU-P200W/
LU-P200X/LU-S200F/LU-S200W/LU-S200X/
PF-L200U/PF-L200F/PF-L500WA/PF-L200W/
PF-L200X/PS-L200F/PS-L200W/PS-L200X/
LR630/LR530/LR335/LR330/LR230/LR530S/
LR330S/LR230S/
ML-530/ML-430/ML-235/ML-230/ML-130/
ML-430S/ML-230S/ML-130S/VL6530i
DWU1902/D1P1903/DWX1904/DNX1905/
D1P1906/DWX1907/DNX1908
User's Guide
Copyright © 2019. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 08/2019

Advertisement

Table of Contents
loading

Summary of Contents for Acer PL1620n

  • Page 1 Acer Projector PL1620n/PL1520i/PL1325W/PL1320W/PL1220/ SL1520i/SL1320Wn/SL1220n/ FL162/FL152/FL221A/FL122/FL112/FL152S/ FL122S/FL112S/ LU-P200U/LU-P200F/LU-P500WA/LU-P200W/ LU-P200X/LU-S200F/LU-S200W/LU-S200X/ PF-L200U/PF-L200F/PF-L500WA/PF-L200W/ PF-L200X/PS-L200F/PS-L200W/PS-L200X/ LR630/LR530/LR335/LR330/LR230/LR530S/ LR330S/LR230S/ ML-530/ML-430/ML-235/ML-230/ML-130/ ML-430S/ML-230S/ML-130S/VL6530i DWU1902/D1P1903/DWX1904/DNX1905/ D1P1906/DWX1907/DNX1908 User’s Guide Copyright © 2019. Acer Incorporated. All Rights Reserved. Acer Projector User’s Guide Original Issue: 08/2019...
  • Page 2 Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
  • Page 3 Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
  • Page 4 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: y the power cord or plug is damaged, cut or frayed y liquid was spilled into the product y the product was exposed to rain or water...
  • Page 5 For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www. acer-group.com/public/Sustainability/sustainability01.htm Do not stare into the beam Do not stare into beam, RG2 As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
  • Page 6 First things first Usage otes Doe: y Turn off the product before cleaning. y Use a soft cloth moistened with mild detergent to clean the displayhousing. y Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’te: y Block the slots and openings on the unit provided for ventilation.
  • Page 7: Table Of Contents

    TABLE OF CO TE TS INTRODUCTION ................9 Package Overview........................9 Standard accessories ........................ 9 Optional accessories ......................... 9 Product Overview ........................10 Connections..........................11 Keypad ............................. 12 Remote control ......................... 13 SETUP A D I STALLATIO ............14 Installing the projector ......................14 Connecting sources to the projector ..................
  • Page 8 ADDITIONAL INFORMATION ............52 Compatible resolutions ......................52 Image size and projection distance ..................55 Projector dimensions and ceiling mount installation ..............61 Troubleshooting ........................62 Warning indicators ........................63 Specifications ........................... 65 English...
  • Page 9: Introduction

    INTRODUCTION Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. The warranty card is only supplied in some specific regions.
  • Page 10: Product Overview

    INTRODUCTION Product Overview otee: ‡ Do not block projector intake and exhaust vents. ‡ When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake and exhaust vents. ‡ Functions vary depending on model definition. Item Item IR Receivers...
  • Page 11: Connections

    INTRODUCTION Connections 3 4 5 10 11 Item HDMI 2 (v1.4) Connector Service connector (for firmware upgrade) HDMI 1 (v2.0) / MHL Connector USB Power Out (5V 1.5A) Connector Composite Connector VGA In Connector Audio In Connector Audio Out Connector Power Socket USB connector (for wifi dongle) RJ-45 Connector...
  • Page 12: Keypad

    INTRODUCTION Keypad Item Item Power LED Menu Lamp LED Keystone Correction Temp LED Information Power Enter Source Re-Sync Four directional select keys English...
  • Page 13: Remote Control

    INTRODUCTION Remote control Model No:J-25050 MC.JMV11.009 Item Item Infrared transmitter 14. PgUp (not supported) POWER 15. COMPONENT (not supported) Laser button 16. PgDn (not supported) RATIO 17. MEDIA (not supported) Select/Enter KeyPad 0~9 Play/Pause Four directional select keys MENU HDMI™/MHL SOURCE HIDE MODE...
  • Page 14 INTRODUCTION MHL (Mobile High-Definition Link) Control Item Description MODE ‡ Press “MODE” button for one second to activate the MHL Control Mode. ‡ To exit, press the “MODE” button again. Select/Enter Press to select/enter the file. Four directional Use up, down, left, right buttons to select items or make select keys adjustments to your selection.
  • Page 15: Setup A D I Stallatio

    Do not operate the projector in any orientation other that table top or ceiling mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector light source or the projector itself. For none standard installation advise please contact Acer. English...
  • Page 16 SETUP A D I STALLATIO Projector installation notice otee: The brightness will be reduced 80% when the projection direction is downward. 225°~315° ±5° ‡ Portrait mode Air outlet side 10° 10° 10° 10° 10° 10° ‡ Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm Minimum 300mm Minimum 300mm...
  • Page 17 SETUP A D I STALLATIO Minimum 100mm Minimum 100mm (3.94 inches) (3.94 inches) ‡ Ensure that the intake vents do not recycle hot air from the exhaust vent. ‡ When operating the projector in an enclosed space, ensure that the surrounding air temperature within the enclosure does not exceed operation temperature while the projector is running, and the air intake and exhaust vents are unobstructed.
  • Page 18: Connecting Sources To The Projector

    SETUP A D I STALLATIO Connecting sources to the projector USB flash drive Smart devices Display Video Output Speakers Screen 3D IR Emitter Audio Output English...
  • Page 19 SETUP A D I STALLATIO Description Power cord Audio cable HDMI (MHL) cable VGA to component/HDTV adapter VGA cable 3 RCA component cable Composite video cable RS232 cable WirelessHD dongle 10 Wireless dongle 11 Wireless remote control 12 LAN cable 13 12V DC cable 14 3D SYNC cable 15 SPDIF cable...
  • Page 20: Adjusting The Projector Image

    SETUP A D I STALLATIO Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. Locate the adjustable foot you wish to adjust on the underside of the projector. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Zoom, lens shift, and focus...
  • Page 21: Remote Setup

    SETUP A D I STALLATIO Remote setup Installing / replacing the batteries Two AAA size batteries are supplied for the remote control. Remove the battery cover on the back of the remote control. Insert AAA batteries in the battery compartment as illustrated. Replace back cover on remote control.
  • Page 22 SETUP A D I STALLATIO Effective range Infra-Red (IR) remote control sensor is located on the top and front sides of the projector. Ensure to hold the remote control at an angle within 40 degrees perpendicular to the projector’s IR remote control sensor to function correctly.
  • Page 23: Using The Projector

    USING THE PROJECTOR Powering on / off the projector Lens cap Powering on Remove the lens cap. Securely connect the power lead and signal/source cable. When connected, the Power LED will turn red. Turn on the projector by pressing the button on the projector keypad or remote control.
  • Page 24: Selecting An Input Source

    USING THE PROJECTOR Selecting an input source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, press the button on the projector keypad or the Source button on the remote control to select the desired input.
  • Page 25: Menu Navigation And Features

    USING THE PROJECTOR Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. button on the projector keypad or the Menu button on the remote To open the OSD menu, press the control.
  • Page 26: Osd Menu Tree

    USING THE PROJECTOR OSD Menu tree Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Presentation Bright HDR SIM. HLG SIM. Cinema Display Mode Game sRGB DICOM SIM. User Off [Default] Blackboard Light Yellow Wall Color Light Green Light Blue Pink...
  • Page 27 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Red [Default] Green Blue Color Cyan Yellow Magenta Color Matching White(*) Hue / R(*) -50 ~ 50 [Default: 0] Saturation / G(*) -50 ~ 50 [Default: 0] Gain / B(*) -50 ~ 50 [Default: 0] Cancel [Default]...
  • Page 28 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Off [Default] 3D Mode 3D [Default]  Auto [Default] 3D Format Top and Bottom Frame Sequential 3D Sync Invert Off [Default] 16:9 Display 16:10 Aspect Ratio Native...
  • Page 29 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Front [Default] Rear Projection Ceiling-top Rear-top 16:9 Screen Type 16:10 [Default] Off [Default] Direct Power On Off [Default] Signal Power On Auto Power Off 0 ~ 180 (5 min increments) Power Settings (min.)
  • Page 30 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu English [Default] Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk Suomi ελληνικά 繁體中文 Language 简体中文 日本語 한국어 Русский Magyar Čeština Setup Options ไทย...
  • Page 31 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu HDMI 1/MHL [Default] HDMI 2 Input Source VGA IN Video Wireless Mirroring Off [Default] High Altitude Default [Default] Options Logo Neutral Setup User Black [Default] Blue Background...
  • Page 32 USING THE PROJECTOR Main Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Menu Serial Number Source Resolution 00x00 Refresh Rate 0.00Hz Display Mode Power Mode (Standby) Light Source Info 0 hr Hours Network Status IP Address Brightness Mode System...
  • Page 33: Display Image Settings Menu

    USING THE PROJECTOR Display menu Display image settings menu otee: Functions vary depending on model definition. Display Mode There are many factory presets optimized for various types of images. ‡ Presentation: This mode is suitable for showing in front of public in connection to the PC. ‡...
  • Page 34 USING THE PROJECTOR ‡ 1.8 / 2.0 / 2.4 / 2.6: For specific PC / Photo source. otee: ‡ These options are only available if the 3D mode function is disabled, the Wall Color setting is not set to Blackboard, and the Display Mode setting is not set to DICOM SIM., HDR SIM. or HLG SIM. ‡...
  • Page 35: Display 3D Menu

    USING THE PROJECTOR Brightness Mode Adjust the brightness mode settings. ‡ DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast performance. ‡ Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the lamp life.
  • Page 36: Display Aspect Ratio Menu

    USING THE PROJECTOR Display aspect ratio menu Aspect Ratio Select the aspect ratio of the displayed image between the following options: ‡ 4e:3: This format is for 4:3 input sources. ‡ 16e:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. ‡...
  • Page 37 USING THE PROJECTOR 1280 1024 Wide Laptop 1280 1024 1280 1024 1024 SDTV 1024 1280 1024 HDTV 1920 1080 1024 WXGA scaling table (screen type 16x10): otee: ‡ Supported screen type 16:9 (1280x720), 16:10 (1280x800). ‡ When screen type is 16:9, the 16x10 format becomes unavailable. ‡...
  • Page 38 USING THE PROJECTOR WXGA scaling table (screen type 16x9): 16 e: 9 screen 480i/p 576i/p 1080i/p 720p Scale to 960x720. 16x9 Scale to 1280x720. Scale to 1280x960, then get the central 1280x720 image to display. Native mode 1:1 mapping centered. 1:1 mapping 1280x720 1:1 mapping...
  • Page 39: Display Edge Mask Menu

    USING THE PROJECTOR 1080p auto mapping rule: Input resolution Auto/Scale Auto H-resolution V-resolution 1920 1080 1440 1080 1440 1080 1024 1440 1080 1280 1024 1440 1080 1400 1050 1440 1080 1600 1200 1440 1080 1280 1920 1080 Wide Laptop 1280 1800 1080 1280...
  • Page 40: Audio Mute Menu

    USING THE PROJECTOR otee: ‡ The image size will reduce slightly when adjusting the horizontal and vertical keystone. ‡ When the Auto Keystone is used, the Four Corner Adjustment function will be disabled. Reset Return the factory default settings for keystone settings. Audio menu otee: Functions vary depending on model definition.
  • Page 41: Setup Projection Menu

    USING THE PROJECTOR Setup menu otee: Functions vary depending on model definition. Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. Setup screen type menu Screen Type (for WXGA/WUXGA model only) Choose the screen type from 16:9 and 16:10. Setup power settings menu Direct Power On Choose “On”...
  • Page 42: Setup Hdmi Link Settings Menu

    USING THE PROJECTOR Setup HDMI Link settings menu otee: ‡ When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector’s OSD.
  • Page 43: Setup Options Menu

    USING THE PROJECTOR Setup options menu Language Select the multilingual OSD menu. Closed Captioning Closed Captioning is a text version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and watch the channels. The available options include “Off”, “CC1”, and “CC2”.
  • Page 44: Setup Reset Osd Menu

    USING THE PROJECTOR Acer_Splash_Downloader.exe program, and follow the on-screen instructions. If the message says “Projector found”, the projector has been connected successfully. otee: If “Error: No Projector found.”, the projector is not connected. Please retry step 2 and step 3. Select logo file Click the “Browse”...
  • Page 45: Network Lan Menu

    USING THE PROJECTOR Network menu otee: Functions vary depending on model definition. Network LAN menu Network Status Display the network connection status (read-only). MAC Address Display the MAC address (read-only). DHCP Use this option to enable or disable the DHCP function. ‡...
  • Page 46: Network Control Menu

    USING THE PROJECTOR Making a direct connection from your computer to the projector* Turn “Off” the DHCP option on the projector. Configure the IP address, Subnet Mask, Gateway, and DNS on projector (“Network > LAN”). Open Network and Sharing Center page on your PC, and assign the identical network parameters to your PC as set on projector.
  • Page 47: Setup Network Control Settings Menu

    USING THE PROJECTOR Setup network control settings menu LAN_RJ45 function For simplicity and ease of operation, the projector provides diverse networking and remote management features. The LAN / RJ45 function of the projector through a network, such as remotely manage: Power On / Off, brightness, and contrast settings.
  • Page 48 USING THE PROJECTOR LAN RJ45 Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). On the PC (Laptop), select Start > Control Panel > Network Connections. Right-click on the Local Area Connection, and select Property. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP).
  • Page 49 USING THE PROJECTOR Click “Properties”. Type in the IP address and Subnet mask, then press “OK”. Press the “Menu” button on the projector. Open on projector Network > LA . Enter the following connection parameters: ± DHCP: Off ± IP Address: 192.168.0.100 ±...
  • Page 50 USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page Tool page Contact IT helpdesk English...
  • Page 51 USING THE PROJECTOR RS232 by Telnet Function There is alternative RS232 command control way, in projector so called “RS232 by TELNET” for LAN / RJ45 interface. Quick Start-Guide for “RS232 by Telnet” ‡ Check and get the IP address on OSD of the projector. ‡...
  • Page 52 USING THE PROJECTOR Open “Control Panel” in Windows 7 / 8 / 10. Windows 7 Windows 10 Open “Programs” Windows 7 Windows 10 Select “Turn Windows features on or off” to open. Windows 7 Windows 10 Have “Telnet Client” option checked, then press “OK” button. English...
  • Page 53: Info Menu

    USING THE PROJECTOR Specification for “RS232 by TELNET”: Telnet: TCP. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). Telnet utility: Windows “TELNET.exe” (console mode). Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly after TELNET connection ready. ±...
  • Page 54: Additional Information

    ADDITIONAL INFORMATION Compatible resolutions Digital compatibility Digital (HDMI 1.4) B0 / Established B0 / Standard Timing B0 / Detail Timing B1 / Video Mode B1 / Detail Timing Timing 720 x 400 @ 70Hz 1280 x 720 @ 60Hz WXGA: 640 x 480P @ 60Hz 4:3 1920 x 1080p @ 60Hz 640 x 480 @ 60Hz...
  • Page 55 ADDITIONAL INFORMATION otee: Functions vary depending on model definition. Analog compatibility B0 / Established B0 / Standard Timing B0 / Detail Timing B1 / Video Mode B1 / Detail Timing Timing 720 x 400 @ 70Hz 1280 x 720 @ 60Hz WXGA: 1280x800@120Hz(RB) 640 x 480 @ 60Hz...
  • Page 56 ADDITIONAL INFORMATION True 3D video compatibility Input timing 1280 x 720P @ 50Hz Top-and-Bottom 1280 x 720P @ 60Hz Top-and-Bottom HDMI 3D Input 1280 x 720P @ 50Hz Frame packing (with 3D 1280 x 720P @ 60Hz Frame packing InfoFrame 1920 x 1080i @ 50Hz Side-by-Side(Half) information)
  • Page 57: Image Size And Projection Distance

    ADDITIONAL INFORMATION Image size and projection distance WXGA Series for 1.3x zoom To obtain an image size of 60” set the projector at a distance 1.5 m and 2.0 m from the screen. 60” Desired image size Height: 91 cm from base to top of image 1.5 m...
  • Page 58 ADDITIONAL INFORMATION XGA Series for 1.3x zoom To obtain an image size of 60” set the projector at a distance 1.8 m and 2.4 m from the screen. 60” Desired image size Height: 105 cm from base to top of image 1.8 m 2.4 m...
  • Page 59 ADDITIONAL INFORMATION WXGA Series for fixed zoom To obtain an image size of 60” set the projector at a distance 0.67 m from the screen. 60” Desired image size Height: 91 cm from base to top of image 0.67 m Desired Distance Desired image size Distance (m)
  • Page 60 ADDITIONAL INFORMATION XGA Series for fixed zoom To obtain an image size of 60” set the projector at a distance 0.75 m from the screen. 60” Desired image size Height: 105 cm from base to top of image 0.75 m Desired Distance Desired image size Distance (m)
  • Page 61 ADDITIONAL INFORMATION 1080p series To obtain an image size of 60” set the projector at a distance 1.6 m and 2.1 m from the screen. 60” Desired image size Height: 86 cm from base to top of image 1.6 m 2.1 m Desired Distance Desired image size...
  • Page 62 ADDITIONAL INFORMATION The projector is equipped with lens shift for adjusting the position of projected image up and down without requiring you to physically move the projector. otee: The figures shown in this section are for reference only not approximate value. The figures between units can be different due to assembly tolerance.
  • Page 63: Projector Dimensions And Ceiling Mount Installation

    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation To prevent damage to your projector, please use the Acer ceiling mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡...
  • Page 64: Troubleshooting

    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen ‡ Ensure all the cables and power connections are correctly and securely connected as described in the "Installation"...
  • Page 65: Warning Indicators

    ADDITIONAL INFORMATION Other problems The projector stops responding to all controls ‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work ‡...
  • Page 66 ADDITIONAL INFORMATION LED lightning messages Power LED Temp LED Lamp LED Message (Red) (Blue) (Red) (Red) Standby state Steady light (Input power cord) Flashing Power on (Warming) (0.5 sec off / 0.5 sec Power on and Lamp lighting Steady light Flashing (0.5 sec off / 0.5 Power off (Cooling)
  • Page 67: Specifications

    ADDITIONAL INFORMATION Specifications Optical Description Maximum resolution 1920x1200@60Hz(RB) ‡ XGA 1024(H) x 768(V) Native resolution ‡ WXGA 1280(H) x 800(V) ‡ 1080p 1920(H) x 1080(V) Lens Manual zoom and manual focus ‡ XGA: 25.5” ~ 301.2” (65cm ~ 765cm) ‡ WXGA: 30”...
  • Page 68 ADDITIONAL INFORMATION Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 69 ADDITIONAL INFORMATION General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada —...
  • Page 70 Acer Marketing name: UWA5 We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU. The following harmonized standards and/or other relevant...
  • Page 71 LR630/LR335/LR330/LR230/LR530S/LR330S/LR230S/ ML-530/ML-235/ML-230/ML-130/ML-430S/ML-230S/ML-130S We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU and ErP Directive 2009/125/EC. The following harmonized...
  • Page 72 D1P1903 Marketing name: PL1520i/FL152/LU-P200F/PF-L200F/LR530/ML-430/VL6530i We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU and ErP Directive 2009/125/EC. The following harmonized...
  • Page 73 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the...

Table of Contents