Philips AC3256/60 User Manual page 16

3
Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust.
4
Air dry the pre-filter.
Note
• Make sure that the pre-filter is
completely dry. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
5
Put the pre-filter back into the
appliance.
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
16 EN
6
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2)
7
Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time.
3s