Page 1
Home Network System Glass Break Sensor KX-HNS104EX Model No. Thank you for purchasing a Panasonic product. This document explains how to install the glass break sensor properly. For details about how to use the system, refer to the User’s Guide (page 18).
Table of Contents Introduction Accessory information ....3 Important Information Disclaimer ........5 About this system ......5 For your safety ......5 Important safety instructions ..6 For best performance ....6 Other information .......7 Setup Part names and functions ..9 LED indicator ......9 Setup overview ......9 Inserting the batteries ....10 Registering the sensor .....11 Confirming the usage area ..12...
Customer Communications Centre R For customers within the U.K.: 0330 3331112 R For customers within Ireland: 01 4475228 R For further support on your product, please visit our website: www.panasonic.co.uk Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 HNS104EX_(en_en)_0111_ver.305.pdf 2017/01/11...
Page 4
Introduction Direct Sales at Panasonic U.K. R Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday - Friday 9:00am - 5:00pm (Excluding public holidays). R Go on line through our Internet Accessory ordering application at www.pas-europe.com...
Power connection the case of broken glass. Panasonic makes no representations or R Use only the power source marked warranties that it will at all times, or on the product.
R Keep out of the reach of small Hub location/avoiding noise children. There is a risk of The hub and other compatible swallowing. If the battery is Panasonic devices use radio waves to swallowed, seek medical attention communicate with each other. immediately. R For maximum coverage and...
Important Information antennas of mobile phone cell able to detect the sound of glass stations. (Avoid putting the hub breaking. on a bay window or near a R The product may not be able to window.) detect the sound of glass breaking R If the reception for a hub location is depending on the noise conditions of not satisfactory, move the hub to...
Page 8
Important Information Disposal of Old Equipment and Information on Disposal in other Batteries (Only for European Union Countries outside the European and countries with recycling Union systems) These symbols (A, B) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Setup Indicator Status Part names and Green, lit No glass break detected functions Red, lit Glass break was detected Red, Sensor is out of range blinking of the hub Green, Registration mode blinking (You pressed and held slowly No battery power Note: R The LED indicator does not indicate sensor status if the sensor has not...
Setup Install the rear cover. Inserting the R Place it with the “ ” mark facing upwards and slide it. batteries R USE ONLY Alkaline batteries AA (LR6) size. R Do NOT use Manganese/Ni-Cd/ Ni-MH batteries. R Confirm the polarities ( Remove the rear cover by pressing the upper sides of the cover (A) and sliding it down (B).
Setup Using the app Registering the When you register the sensor by using sensor the [Home Network] app, you can assign a name to your devices and This procedure is not required for group them by location. For more devices that were included as part of information, refer to the User’s Guide a bundle.
Setup R Near magnetic fields (such as near microwaves and magnets) Confirming the R Areas subject to extreme usage area temperature changes, such as next to air conditioners R Near devices that emit strong radio Wireless communication waves, such as mobile phones range The wireless communication range of each device in the system from the hub...
R Panasonic takes no responsibility for Note: any injury or damage caused by the use of the sensor. R Minimum size for all types is 28 cm R The sensor may make false ´...
Page 14
Setup When looking from the side Sensor detection range The sensor detection range varies depending on position of the sensitivity switch (MHIGHN/MLOWN). Note: R Install the sensor in the same room as the window that you want to detect. Walls or other obstacles between the window and the sensor may prevent the sensor from detecting breaking glass, even when...
Setup R Ambient noise, such as the sound of tableware, glass, or metal objects Wall mounting contacting each other, explosive noises, children’s voices, howling of There are two methods for wall dogs, etc., may cause false mounting the sensor. To mount the detections.
Page 16
Setup Attach the sensor to the rear cover. Using the rear cover R Insert the grooves on the Remove the rear cover by sensor to the 4 tabs on the rear pressing the upper sides of the cover, and then push down the cover (A) and sliding it down (B).
Page 17
Setup Attach the wall mounting adaptor Using the wall mounting adaptor to the wall by using screws ( Remove the rear cover by R Place the wall mounting pressing the upper sides of the adaptor with “UP” mark facing cover (A) and then sliding it down upwards.
– Sensor integration You can configure the sensor to trigger other system events, such as camera recording, turning on an electric device (such as a lamp), etc. www.panasonic.net/pcc/support/tel/ (Appropriate device required.) homenetwork/manual/ – Telephone alert You can configure the system to call a preprogrammed phone number when the sensor is triggered.
Appendix When the sensor is triggered once a month and the Specifications surrounding temperature is approx. 25 °C. Note that battery R Standards life may be reduced in very cold DECT (Digital Enhanced Cordless environments and in areas Telecommunications) where loud noises (such as R Frequency range door slams) occur frequently, 1.88 GHz –...
The guarantee period applicable to this product shall be 12 months. Please keep these operating instructions with your receipt. Panasonic U.K. a branch of Panasonic Marketing Europe GmbH Receipt No. Date of purchase Model No.
Page 21
Appendix Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.) “ON” (power) Protective earth “OFF”...
Page 22
Appendix General information Declaration of Conformity: R Panasonic Corporation declares that the radio equipment type (KX-HNS104) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.ptc.panasonic.eu/doc Contact to Authorised Representative:...