Digital home theater component, digital sound projector, digital audio server, digital audio terminal, optional speaker system, plasma display monitor, digital cinema projector, digital home theatre receiver, dvd player, dvd changer, home theatre speaker (44 pages)
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. CAUTION Keep these instructions. RISK OF ELECTRIC SHOCK Heed all warnings. DO NOT OPEN Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE Do not use this apparatus near water. COVER (OR BACK).
Page 3
“OFF” and “ON”, requirements. Modifications not expressly approved please try to eliminate the problem by using one of the by Yamaha may void your authority, granted by the following measures: FCC, to use the product.
UNPACKING Please check to make sure all listed items are included. Main and rear speakers Speaker cables (and rear center speaker for NS-P436) [15m] < > NS-P430 NX-430P < > NS-P436 < > NS-P430 < > NS-P436 [4m] Center speaker...
Secure placement or installation is the owner’s responsibility. level. Extremely loud playing of a movie soundtrack’s low YAMAHA shall not be liable for any accident caused by improper frequency, bass-heavy sounds or similarly loud popular music placement or installation of speakers.
● This subwoofer system employs Advanced Yamaha NS-P430 includes four NX-430P speaker systems, one NX- Active Servo Technology which YAMAHA has developed C430 speaker system and one YST-SW015 subwoofer for reproducing higher quality super-bass sound. (Refer to system.
(dialog etc.). The subwoofer emits reinforcing low frequencies on your audio system. Note In this speaker package, the same speakers (NX-430P) Main R are used for the main and rear speakers (and rear Center center speaker for NS-P436).
Placing the subwoofer It is recommended to place the subwoofer on the outside of either the right or the left main speaker. (See fig. Å .) The Å ı placement shown in fig. ı is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel out each other.
Mounting the main/rear/center speakers (and rear center speaker for NS-P436) on the wall You can mount the main, rear and/or center speakers (and/ or rear center speaker for NS-P436) on a wall. Tapping screw To mount the speakers on a wall, use the holes of the (Available at the brackets attached on the speakers’...
NS-P436) by using commercially available speaker stands or brackets You can also use the screw holes on the bottom of the Using the Yamaha Speaker Stand SPS-10MM (option) speaker for installing the speakers on commericially By using the Yamaha Speaker Stand...
CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. An example of basic connections Main speakers Center speaker Right Left Amplifier SPEAKERS CENTER MAIN REAR CENTER — — — — — REAR (SURROUND) WOOFER OUTPUT INPUT Subwoofer...
Page 12
NS-P436) to the speaker output terminal(s) of the amplifier. terminals of your amplifier with the provided speaker * To connect with a YAMAHA DSP amplifier (or AV cables. receiver), connect the SUBWOOFER (or LOW PASS * The provided speaker cables have labels marked etc.) terminal on the rear of the DSP amplifier (or AV...
How to connect speaker cables to the input terminals of the speakers For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the speakers. Main speakers Before connecting Center speaker...
USING THE SUBWOOFER (YST-SW015) Controls and their functions Front panel SUBWOOFER SYSTEM YST-SW015 STANDBY/ON B.A.S.S. HIGH CUT VOLUME 50–150Hz 0–10 SUBWOOFER SYSTEM YST-SW015 STANDBY/ON B.A.S.S. HIGH CUT 50 – 150Hz VOLUME 0 – 10 Port Rear panel (General model) INPUT AUTO PHASE /MONO...
POWER switch Normally, set this switch to the ON position to use the subwoofer. In this state, you can turn on the subwoofer or turn the subwoofer into the standby mode by pressing the STANDBY/ON ( ) button. Set this switch to the OFF position to completely cut off the subwoofer’s power supply from the AC line.
(NX-430P) is obtained when this control is set at 110 volume of your whole sound system by using the Hz. However, the tone balance may change depending amplifier’s volume control.
Following figures show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined with NX-430P. Frequency characteristics of this subwoofer (YST-SW015) ● When combined with NX-430P HIGH CUT VOLUME 50 – 150Hz 0 – 10 PHASE–Set to the REV...
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for YST-SW015) The theory of Yamaha Active Servo Technology has been amplifier is able to generate precise, low-amplitude, low- based upon two major factors, the Helmholtz resonator and frequency waves with superior damping characteristics. negative-impedance drive. Active Servo Processing These waves are then radiated from the cabinet opening as speakers reproduce the bass frequencies through an “air...
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center.
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Indonesia WA31510-2 YAMAHA MUSIC AUSTRALIA PTY, LTD.