Taking Out Discs - Epson Disc Producer PP-100NII User Manual

Taking out discs

Follow the steps below to take out published discs.
Open the disc cover (only when the output stacker is Stacker 2 or Stacker 3), and take out
1
the stacker.
• Do not open the disc cover while a job is being processed (while the BUSY LED flashes). This
could adversely affect the writing or printing quality.
• If you open the disc cover while a job is being processed, a slow beeping alert sound is
played and the status of the current job becomes Standby. If you close the disc cover, job
processing resumes automatically.
• If a job is being processed, first pause the job and then open the disc cover. See "Pausing
jobs" on page 116 in this guide for the procedure to pause a job.
• To ensure safety during arm operation, never insert your hands.
• Do not operate any stackers while the arm is moving. This could damage the arm.
• When the BUSY LED is flashing quickly, do not pull out Stacker 4 because discs are being
output to Stacker 4. Doing so may damage the discs.
• Do not remove discs while the stacker is attached to this product. Be sure to remove the
stacker beforehand.
Publishing Discs
111