Advertisement
product introduction
AT A GLANCE
Front/Rear
1
LED
2
Keypad
3
2-PIN Connector
4
6-PIN Connector
5
8-PIN Connector
6
Output Selection Switch
7
Tamper Switch
8
Fixing Screw
6_
product introduction
Displays the status of the system operation.
Used to enter the ID/password.
Can be connected to the power cable.
Can be connected to Wiegand, RS-232 communication cables.
Connected to the tamper, LED and buzzer control connection cables.
Switch that allows you to select an output from 8 bit, 4 bit Burst and Wiegand.
Tamper switch.
Screws for fi xing the devices.
6
5
7
4
3
8
Advertisement
