Table of Contents
Advertisement
Chapter 2 Preparations
5. Hold the tray firmly and insert it into the bay.
6. Slowly close the handle.
The tray is locked making a clicking sound.
7. Turn on the server, run SETUP utility, and then specify the boot order from the Boot menu. For details
about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".
88
Note
•
Push it all the way until the handle's lock touches the frame.
•
Hold the tray firmly with both hands.
Note
When you push the drive into the bay, confirm the handle got hooked on the frame.
The stored boot order is cleared when a hard disk drive is added.
Tips
Express5800/E120e-M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
