D-Link DWL-AG520 Manual page 10

1. Connect the Wireless Access Point is shown in the example) to a
Broadband connection (i.e., a Cable modem such as the cable
modem.)
2. Install the DWL-AG520 Wireless PCI Adapter into a desktop
computer on your wireless network. (You can also install the
Wireless Cardbus Adapter into a laptop computer. Please refer to
the Quick Install Guide included with each product.)
3. Check the Device Manager to confirm that the wireless adapter is
installed correctly. Please refer to the Networking Basics section in
this manual entitled: Checking the Installation of the Drivers for
the Wireless Adapter.
4. Set the Static IP Address of the wireless adapters. Please refer to
the Networking Basics section in this manual entitled: Assigning
an IP Address.
5. Learn to share printers and files. Please refer to the Networking
Basics section in this manual entitled: Adding and Sharing Printers
6. in Windows XP.
3. An Ad Hoc Network
If you have two or more computers (desktops or laptops) and want to share
files and printers, but no Internet connection, please complete the following
instructions. When your Ad Hoc network is complete it may look similar to
this:
(Requirements: Wireless network adapters -for example)
To complete this installation, please follow these steps:
1. Install the D-Link DWL-AG520 Wireless PCI Adapter into a desktop
computer on your wireless network. (You can also install the
Wireless Cardbus Adapter into a laptop computer. Please refer to
the Quick Install Guide included with each product.)
2. Set the Static IP Address of the wireless adapters. Please refer to
the Networking Basics section in this manual entitled: Assigning
an IP Address.
10