Changing The Thumbnail Display - Panasonic AJ-PG50EJ Operating Instructions Manual

Changing the Thumbnail Display

The thumbnail screen can be customized according to the op-
erating conditions to improve efficiency.
Example:
• Set the settings of the "THUMBNAIL SETUP" (➝ page 94)
menu item as shown below.
Set "INDICATOR" to "ALL HIDE"
Set "DATA DISPLAY" to "CLIP NAME"
Set "THUMBNAIL SIZE" to "LARGE"
• Set the "REPOSITION" (➝ page 92) menu item to "SELECT-
ED CLIPS".
Thumbnail screen display example
Note:
The thumbnail output destinations can be switched in the "GUI
OUTPUT" menu item (➝ page 108).
Setting the thumbnails to display
1
Use the cursor buttons to align the cursor with the
type of clips you want to display in the "REPOSI-
TION" (➝ page 92) menu item.
2
Press the [SET] button.
Setting the thumbnail size
1
Use the cursor buttons to align the cursor with the
size of thumbnails you want to display in the
"THUMBNAIL SIZE" (➝ page 94) menu item.
2
Press the [SET] button.
44
Main Mode: Thumbnail Screen
Setting the display of clip information
The display of clip information can be customized according
to purpose.
1
Use the cursor buttons to select the "DATA DIS-
PLAY" (➝ page 94) menu setting and then align the
cursor with the item you want to set.
2
Press the [SET] button.
Setting the bonding device information dis-
play
1
Select "BONDING DEV. INFO." below the "INFOR-
MATION SEL." (➝ page 95) menu item using the cur-
sor buttons.
2
Press the [SET] button.
NOTE:
When information cannot be acquired from the bonding de-
vice, nothing will be displayed.
Setting the display of the number and dura-
tions of clips
1
Select "THUMBNAIL INFO." below the "INFORMA-
TION SEL." (➝ page 95) menu item using the cursor
buttons.
2
Press the [SET] button.
3
Use the cursor buttons to align the cursor with the
type of information you want to display in the
"THUMBNAIL INFO." (➝ page 95) menu item.
4
Press the [SET] button.
Setting the items to display as properties
Set the simplified property display items to display on the left
side of a thumbnail.
1
Use the cursor buttons to align the cursor with the
"PROPERTY DISP." (➝ page 95) menu item.
2
Press the [SET] button to open the item menu.
All selected items are indicated by check marks.