Philips 32BDL3550Q User Manual page 2

32BDL3550Q
Safety Instructions
Warnings and Precautions
KNOW THESE SAFETY SYMBOLS
Attenzione
Rischio di scosse
elettriche non aprire
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE ELETTRICHE, NON
RIMUOVERE IL COPERCHIO (O LA PARTE POSTERIORE). ALL'INTERNO NON VI
SONO PARTI RIPARABILIDALL'UTENTE. PER L'ASSISTENZA,
RIVOLGERSI A PERSONALE QUALIFICATO.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates high voltage is present
inside. It is dangerous to make any kind of
contact with any inside part of this product.
This symbol alerts you that important
literature concerning operation and
maintenance has been included with this
product.
CAUTION:
FCC/CSA regulations state that any
unauthorized changes or modifications to this
equipment may void the user's authority to
operate it.
CAUTION:
To prevent electric shock, match the wide
blade of plug to the wide slot, and fully insert
the plug.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE
OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The Socket-outlet should be installed near the apparatus
and be easily accessible.
Read and follow these instructions
when connecting and using your Public
Information Display:
• Unplug the display if you are not going to use it for an
extensive period of time.
• Unplug the display if you need to clean it with a slightly
damp cloth. The screen many be wiped with a dry cloth
when the power is off. However, never use alcohol,
solvents or ammonia-based liquids.
• Consult a service technician if the display does
not operate normally when you have followed the
instructions in this manual.
• The casing cover should be opened only by qualified
service personnel.
• Keep the display out of direct sunlight and away from
stoves or any other heat sources.
• Remove any object that could fall into the vents or
prevent proper cooling of the display's electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not
expose it to rain or excessive moisture.
• If turning off the display by detaching the power cable,
wait for 6 seconds before re-attaching the power cable
for normal operation.
• To avoid the risk of shock or permanent damage to
the set do not expose the display to rain or excessive
moisture.
• When positioning the display, make sure the power plug
and outlet are easily accessible.
• IMPORTANT: Always activate a screen saver program
during your application. If a still image in high contrast
remains on the screen for an extended period of time, it
may leave an 'after-image' or 'ghost image' on the front
of the screen. This is a well-known phenomenon that is
caused by the shortcomings inherent in LCD technology.
In most cases the afterimage will disappear gradually
over a period of time after the power has been switched
off. Be aware that the after-image symptom cannot be
repaired and is not covered under warranty.
Environmental absolute ratings
Item
Storage temperature
Operation
temperature
Glass Suraface
temperature
(Operation)
Storage humidity
Operating humidity
• Please confirm the distribution system in building
installation shall provide the circuit breaker rated
120/240V, 20A (maximum).
• If provided with a 3-pin attachment plug on the power
cord, plug the cord into a grounded (earthed) 3-pin
outlet. Do not disable the power cord grounding pin, for
example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
• Stability Hazard
The device may fall, causing serious personal injury or
death. To prevent injury, this device must be securely
attached to the floor/wall in accordance with the
installation instructions.
ii
Min. Max. Unit
-20 65 °C
0 35 °C
0 65 °C
5 90 % RH
20 80 % RH