LG 23MB35PM Owner's Manual
Hide thumbs
Also See for 23MB35PM:
- Owner's manual (29 pages) ,
- Owner's manual (29 pages) ,
- Owner's manual (29 pages)
Related Manuals for LG 23MB35PM
Summary of Contents for LG 23MB35PM
- Page 1 OWNER’S MANUAL LED LCD Monitor (LED Monitor*) Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL 19MB35PM 22MB35PM 23MB35PM 24MB35PM www.lg.com...
-
Page 2: Table Of Contents
Unpacking SPECIFICATIONS Parts and buttons 19MB35PM Setting up the Monitor set 22MB35PM - Attaching the Stand Base 23MB35PM - Detaching the stand base 24MB35PM - Detaching the stand body Preset Modes (Resolution) - Mounting on a table Indicator - Adjusting the angle... -
Page 3: Assembling And Preparing
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. -
Page 4: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Power Indicator LED On : Power is on LED Off: Power is off (Power Button) Front Side Buttons Input Connectors (See p.11 to 12) See p.11 to 12) to 12) 12) ) -
Page 5: Setting Up The Monitor Set
To protect the screen from scratches, cover the surface with a soft cloth. Stand Base 19MB35PM 22MB35PM 23MB35PM Stand Body Check the position (at the front and rear) of the stand body, then mount the stand base on the stand body as shown in the figure. -
Page 6: Detaching The Stand Base
To avoid damaging the screen when lifting or moving the monitor, only hold the stand or 19MB35PM 22MB35PM 23MB35PM the plastic cover. This avoids putting unnec- essary pressure on the screen. Using a coin, turn the screw in the stand base Only remove the tape and the locking pin counterclockwise. -
Page 7: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle Lift the monitor and place it on the table in an Place the monitor mounted on the stand base upright position. in an upright position. Install at least 100 mm away from the wall to ensure sufficient ventilation. -
Page 8: Adjusting The Stand Height
ASSEMBLING AND PREPARING Adjusting the stand height Using the Kensington locking device Place the monitor mounted on the stand base The connector for the Kensington lock is located in an upright position. on the rear of the monitor. For more information on installation and usage, Remove the tape attached at the bottom rear refer to the Kensington lock user manual or visit of the stand body, then pull out the locking... -
Page 9: Swivel Stand
ASSEMBLING AND PREPARING Swivel stand Be careful with the cables when rotating the screen. Image shown may differ from your Monitor set. Swivel 355 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. -
Page 10: Mounting On A Wall
For more information, refer to the damaged and drop from mounted position. In instructions supplied with the wall mount. this case, LG Electronics is not responsible for VESA compatible. Please use VESA standard as below. 784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm... -
Page 11: Using The Monitor Set
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC DVI-D connection Transmits a digital video signal from your PC to Your Monitor set supports Plug & Play*. the Monitor set. Connect the PC and the Monitor *Plug & Play: A PC recognizes a connected set with a DVI cable as shown in the following device that users connect to a PC and turn illustrations. -
Page 12: Peripheral Device Connection
USING THE MONITOR SET Peripheral device connection Self Image Setting Function Press the power button on the bottom panel to Connect peripheral devices to the monitor using turn the power on. When monitor power is turned headphone ports. on, the "Self Image Setting"... -
Page 13: Customizing Settings
When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 19MB35PM:1280 x 1024 22MB35PM/23MB35PM/24MB35PM:1920 x 1080 You can choose the input signal. • When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. -
Page 14: Customizing Settings
For a normal environment, it is recommended that you use 'Off'. For a fast-moving picture, it is recommended that you use 'High'. Wide/Original Wide (Only for Switch to full screen mode according to input image signal. 22MB35PM/23MB35PM/ Original 24MB35PM) ● ● Change the input image signal ratio to original. -
Page 15: Picture
CUSTOMIZING SETTINGS Picture Press MENU button on the bottom of the Monitor set to display the Menu OSD. Select the "Next Menu" button to enter the more option settings. Enter to Picture by pressing the ▼ button. Set the options by pressing the ◄ or ► or ▼ buttons. -
Page 16: Color
CUSTOMIZING SETTINGS Color Press MENU button on the bottom of the Monitor set to display the Menu OSD. Select the "Next Menu" button to enter the more option settings. Select Color by pressing the ► button. Enter to Color by pressing the ▼ button. Set the options by pressing the ◄... -
Page 17: Display
CUSTOMIZING SETTINGS Display Press MENU button on the bottom of the Monitor set to display the Menu OSD. Select the "Next Menu" button to enter the more option settings. Select Display by pressing the ► button. Enter to Display by pressing the ▼ button. Set the options by pressing the ◄... -
Page 18: Others
CUSTOMIZING SETTINGS Others Press MENU button on the bottom of the Monitor set to display the Menu OSD. Select the "Next Menu" button to enter the more option settings. Select Others by pressing the ► button. Enter to Others by pressing the ▼ button. Set the options by pressing the ◄... -
Page 19: Reader Setting
CUSTOMIZING SETTINGS READER Setting Press READER button on the bottom of the Monitor set to display the Reader Mode OSD. Set the options by pressing the ◄ buttons. Each option is explained below. Reader Mode Description Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. -
Page 20: Smart Energy Saving
CUSTOMIZING SETTINGS SMART ENERGY SAVING Press button on the bottom of the Monitor set to display the SMART ENERGY SAVING OSD. Set the options by pressing the ► buttons. Each option is explained below. SMART ENERGY SAVING Description High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function. Enables SMART ENERGY SAVING you can save energy with this energy- low efficient function. -
Page 21: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? y Adjust the brightness and the contrast. - Page 22 Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
-
Page 23: Specifications
SPECIFICATIONS SPECIFICATIONS 19MB35PM Display Screen Type Flat Panel Active matrix-TFT LCD Anti-Glare coating Pixel Pitch 0.2928 mm x 0.2928 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D) Input Form Separate Sync. -
Page 24: 22Mb35Pm
SPECIFICATIONS SPECIFICATIONS 22MB35PM Display Screen Type Flat Panel Active matrix-TFT LCD Anti-Glare coating Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D) Input Form Separate Sync. -
Page 25: 23Mb35Pm
SPECIFICATIONS SPECIFICATIONS 23MB35PM Display Screen Type Flat Panel Active matrix-TFT LCD Anti-Glare coating Pixel Pitch 0.2652 mm x 0.2652 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D) Input Form Separate Sync. -
Page 26: 24Mb35Pm
SPECIFICATIONS SPECIFICATIONS 24MB35PM Display Screen Type Flat Panel Active matrix-TFT LCD Anti-Glare coating Pixel Pitch 0.275 mm x 0.275 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D) Input Form Separate Sync. -
Page 27: Preset Modes (Resolution)
1024 x 768 48.363 1024 x 768 60.023 1152 x 864 67.500 1280 x 1024 63.981 1280 x 1024 79.976 Recommend Mode 22MB35PM 23MB35PM 24MB35PM Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 x 400 31.468 640 x 480 31.469 640 x 480 37.500... -
Page 28: Proper Posture
PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor set. Adjust the Adjust the location of the Monitor set and Monitor set to avoid it your posture to reflecting light. allow you to view images at the optimal viewing angle. - Page 29 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.