Toshiba RS-TX20 Viewer's Manual page 19

Connect the Coaxial RF cable coming from the wall to the Cable/Antenna-RF In jack
on the DMS.
Connect a Composite A/V cable from the Audio/Video Output jacks on the DMS to
the Audio/Video Input jacks on your TV.
Connect the phone cord (see page 8). After you complete Guided Setup, you can
connect your DMS to a home network and use a broadband Internet connection instead
of a phone line to connect to the TiVo service. See Chapter 8.
Plug in all power cords and turn on your TV.
Set your TV to display video from the input jacks you used in step
to find the correct TV input setting by pressing the Input or TV/Video button on your
TV's remote control until you see the Welcome screen. (For more help, see page 131.)
Once you see the Welcome screen, you're ready to complete Guided Setup. If you need
help, see Chapter 2.
S e t u p 1 : A n t e n n a o r C a b l e ( N o C a b l e B o x )
. You may have
1
11