Setting Channel Skip; Labeling Channels - Toshiba 19SL410U Owner's Manual

Setting channel skip

To prevent certain channels from being viewed,
channel positions can be skipped.
1
From the Setup menu, highlight Installation and
press .
2
Press or to select Channel Options and press
. The list of channels will appear.
Channel Options
Ch. Type
1 Digital
2 Analog
3 Digital
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
3
Press or to select a channel position to be
skipped and press
the box. To remove the
again.
To add a channel to the channel memory:
Highlight the checked box next to the channel
number you want to add, and then press
remove the symbol.
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash (
remote control to enter the channel number (for
example, 56-1).
If the channel is found, the number will be added to
the list and the box will be unchecked. If the channel
is not found, a message will appear.
Note: Skipped channels cannot be selected with
or ; however, they can still be accessed
using the number keys on the remote control.
26
Chapter 5: Setting up your TV
. A symbol will appear in
symbol, press
to
) on the

Labeling channels

A list of common channel labels (logos) for various
channels (ABC, CBS, etc.) will be programmed into
the TV. You will be able to view and assign these
logos from the Channel Labeling window. If the
desired channel label is not provided in the list, you
will be able to manually enter/edit labels using the
software keyboard.
To assign channel labels:
1
Press and open the Preferences menu.
2
Highlight Channel Labeling and press
Channel Labeling window opens.
3
Press or to select the channel you want to
label.
4
Press to highlight the desired channel
label and press .
5
Repeat steps 3 and 4 for other channels.
6
To save your settings, highlight Done and press
.
Channel Labeling
{No Label}
A&E
ABC
ABCFAM
ABCHD
AMAX
AMAXW
AMC
ANIMAL
The maximum number of labels that can be stored is
128.
To remove channel labels:
1
Open the Channel Labeling window.
2
Press or to select the channel for which
you want to remove the label.
3
Press to highlight No Label and press
.
4
Repeat steps 2 and 3 for other channels.
5
To save your settings, highlight Done and press
.
If the desired channel label is not available from the
list of presets, you can create a custom label.
. The
ANT/CABLE
16-1
A&E
Press CH UP/DOWN to
change channels.
Custom
Clear All
Done