Advertisement
Set the necessary settings for Ustream (currently IBM Cloud Video) using "Camera Settings for Live Streaming" of
the Action Cam Movie Creator's camera settings.
08-03
The channel set by "Camera Settings for Live Streaming" of the Action Cam Movie Creator's camera settings is
incorrect.
This message also displays if other media starts streaming on the same channel while streaming from the camera is
performed.
Set the channel again.
08-04
The total time of saved video on Ustream (currently IBM Cloud Video) has reached the limit. Stop streaming video.
08-05
The saving settings of video cannot be saved to Ustream (currently IBM Cloud Video) because an error has occurred
on the network.
Some other network error has occurred.
Confirm the setting of the access point or the security of the access point using "Camera Settings for Live Streaming"
of the Action Cam Movie Creator's camera settings.
08-06
Access point has been found but is not connected. Check the password of the access point and connect again.
08-07
Access point cannot be found. Confirm the setting of the access point using "Camera Settings for Live Streaming" of
the Action Cam Movie Creator's camera settings.
08-08
Set the date and time again on your camera.
08-09
An unknown error has occurred on Ustream (currently IBM Cloud Video), when using the Live Streaming function.
Wait a moment and then try confirming the connection again.
10-02
Turn the power off and then on again.
10-03
The battery pack is delivering current exceeding the maximum discharge current (the proper operation of the camera
is assured even when an external microphone, etc., is connected).
A different battery pack is detected when the camera is powered on.
Battery pack deterioration is detected.
Battery charge is insufficient for operation.
10-04
Unable to record images because the camera temperature has risen.
The memory card does not contain playable images.
Recovering the memory card.
Advertisement
