Quick Vpn Server Setup Instructions - D-Link DIR-878 User Manual

Section 5 - Quick VPN

Quick VPN Server Setup Instructions

Before proceeding, ensure that your Internet connection is working properly.
We recommend configuring Dynamic DNS before proceeding with Quick
VPN setup. If your router is assigned an IP address from your ISP using DHCP, it
may frequently change, requiring clients credentials to be set up again and a
simple DDNS address will be easier than an IP address.
In the Features menu on the bar on the top of the page, click Quick VPN to
configure the following options:
L2TP over IPSec:
Enable or disable the Quick VPN server.
If you enable Quick VPN, the following options are available:
Username: .
Enter a username between 1 and 20 characters.
Password:
Enter a password between 1 and 20 characters.
PSK:
Enter a passkey between 6 and 64 characters.
VPN Profile for iOS Click export to save the VPN profile settings file for iOS devices or
Device and Mac Mac OS X.
OS X:
Authentication Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.
Protocol: MSCHAPv2 is the default.
MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128.
None is the default.
D-Link DIR-878 User Manual 83