Related Manuals for Whirlpool Omnia Commercial 6th Sense AWG 1112/PRO
Summary of Contents for Whirlpool Omnia Commercial 6th Sense AWG 1112/PRO
- Page 1 Health & Safety, Use & Care and Installation guide AWG 1112 /PRO AWG 1112 S/PRO www.whirlpool.eu/register...
- Page 2 ENGLISH (Original Instruction for Use) . . . . . . . . . 3...
-
Page 3: Table Of Contents
ENGLISH HEALTH & SAFETY, USE & CARE and INSTALLATION GUIDES THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on www.whirlpool.eu/register Index Health and Safety Guide SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DECLARATION OF CONFORMITY . - Page 4 FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 INDICATORS .
-
Page 5: Safety Instructions
Health and Safety Guide SAFETY INSTRUCTIONS device, such as a timer, or Move the appliance without CAUTION: Read the separate remote controlled lifting it by the worktop or top instructions before using system . lid . appliance . This appliance is intended to Installation, including water Before using the appliance, be used in public areas and... - Page 6 four feet are stable and resting ELECTRICAL WARNINGS safe operation, please see the on the floor, adjusting them as Use and Care Guide . It must be possible to required, and check that the disconnect the appliance from DISPOSAL OF PACKAGING appliance is perfectly to level the power supply by MATERIALS...
-
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Mr. Stefano Demattè, Global Platform Leader, Horizontal Axis Washers, representative of Whirlpool EMEA S.p.A Via Carlo Pisacane n.1, 20016 Pero (MI), Italy declare under our sole responsibility that the product washing machine WHIRLPOOL AWG 1112 /PRO AWG 1112 S/PRO... -
Page 8: Use And Care Guide
Use and Care guide PRODUCT DESCRIPTION APPLIANCE 1. Worktop 2. Detergent dispenser 3. Control panel 4. Door handle 5. Door 6. Water filter / Emergency drain hose (if available) - behind plinth - 7. Plinth (removable) 8. Adjustable feet (4) DETERGENT DISPENSER 1. -
Page 9: Control Panel
etergent recommenDations for various types of launDry White robust laundry (cold-95°C) Heavy duty detergents Mild detergents containing whitener and/or optical White delicate laundry (cold-40°C) brighteners Detergents containing whitener and/or optical brighte- Light/pastel- shaded colours (cold-60°C) ners Colour detergents without whitener / optical brighte- Intensive colours (cold-60°C) ners... -
Page 10: Technical Data For Water Connection
TECHNICAL DATA FOR WATER CONNECTION WATER CONNECTION WATER SUPPLY Cold WATER TAP 3/4” threaded hose connector MINIMUM WATER SUPPLY PRESSURE 100 kPa (1 bar) MAXIMUM WATER SUPPLY PRESSURE 1000 kPa (10 bar) -
Page 11: Door
DOOR To open the door, pull the handle To close the door, hold the handle and push so that you can hear it click shut . DRUM LIGHT (if available) • During programme selection: the light goes on • After programme end, when you open the door, for laundry loading the light goes on for a while for unloading the •... -
Page 12: How To Use The Appliance
HOW TO USE THE APPLIANCE FIRST TIME USE If you plug in the washing machine, it will switch Add a small amount of heavy duty detergent on automatically . (maximum 1/3 of the quantity the detergent To remove residues from manufacturing, manufacturer recommends for lightly soiled laundry) to the main wash compartment of the detergent dispenser . -
Page 13: Daily Use
DAILY USE SORTING YOUR LAUNDRY TYPE OF FABRIC / CARE LABEL SYMBOL REMOVE ALL OBJECTS FROM Cottons, mixed fibres, easy care / synthetics, wool, POCKETS handwash items . • Coins, pins etc . can damage your • Colour laundry as well as parts of the washing separate coloured and white items . - Page 14 HOW TO USE THE WASHING MACHINE LOAD LAUNDRY Find more information regarding programmes in • Open the door and load the laundry . the Programme Chart . Observe the maximum load sizes given in Change temperature, if needed the programme chart . If you want to change the temperature indicated on the display, make sure that the CLOSE DOOR...
- Page 15 Select options, if needed Correct dosing of detergent / additives is If you want to select additional options, important, because make sure that the options button lights • it optimizes the cleaning result up . The options which are selectable for your •...
- Page 16 CHANGE THE SETTINGS OF A RUNNING PAUSE A RUNNING PROGRAMME AND OPEN THE DOOR, IF NEEDED PROGRAMME, IF NEEDED Press “Start/Pause” to interrupt a running It is possible to change the settings while a programme programme is running . The changes will be •...
-
Page 17: Programmes And Options
PROGRAMMES AND OPTIONS For selecting the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. PROGRAMME Type of Wash Care Settings and Recommendations Labels WORKING Dirty working clothes made of robust load cotton material or cotton-synthetics CLOTHES... - Page 18 PROGRAMME Type of Wash Care Settings and Recommendations Labels SYNTHETICS 4.0 kg Normally soiled laundry made load of artificial fibres (like polyester, temperature range polyacrylics, viscose etc .) or their Cold to 60°C blends with cotton . max spin speed Prewash, selectable options Bio Stain 15, Heavy Soil,...
- Page 19 OPTIONS SELECTABLE BY THE OPTIONS BUTTON The programme chart gives an and options are selectable. option blinks and switches off overview of possible combinations Also certain options are not again, and a signal sounds. of programmes and options. Not combinable. In this case, the all combinations of programmes indicator of the non-combinable PREWASH...
- Page 20 HEAVY SOIL Helps to clean heavily soiled, stained Can prolong the programme by up to laundry by optimizing the efficiency 15 minutes . of additives for stain removal . Important: Appropriate for use of Add an appropriate amount stain removers and bleaches on oxygen basis .
- Page 21 OPTIONS WHICH ARE DIRECTLY SELECTABLE BY PRESSING THE RESPECTIVE BUTTON COLOURS 15° Helps to preserve the colours of Suitable for lightly soiled coloured your laundry by washing it with cold laundry without stains . water (15°C) . Saves energy for water heating, while keeping a good wash Make sure that your detergent can result .
- Page 22 SPIN If you switch on the washing If you want to change the spin speed, machine, the last used programme press the Spin button, turn the knob and spin speed setting will appear on to select the desired spin speed and the control panel .
-
Page 23: Functions
FUNCTIONS ON/OFF To switch on the washing machine: To switch off the washing machine after programme end: press the button until the Start/Pause button lights up . press the key until the lights go off . To cancel a running programme: press and hold the button until “rES”... - Page 24 DOSING AID Helps to dose the right amount of (soft) corresponds to your local water detergent for your laundry load . hardness level – if not adapt it (see “DOSING AID / FIRST USE”) . Before using this option: See separate section Dosing Aid – First The concentration of detergents use / Daily use available on the market differs...
-
Page 25: Indicators
INDICATORS DOOR CAN This indicator lights BE OPENED • before you have started a programme • when you have paused a programme and the water level is not too high, or the laundry is not too hot in that programme phase •... -
Page 26: Dosing Aid / First Use
DOSING AID / FIRST USE To enable this function to calculate the detergent amount as precisely as possible, adapt the washing machine to the dosing values of the detergents you use, and also to your local water hardness. SAVE THE DOSING VALUES FOR THE DETERGENTS YOU USE Detergent types: Colour... - Page 27 To save these values in the washing machine: Turn the knob to adjust the dosing value to the one you have identified before on the Select the programme for which you detergent pack . Afterwards confirm it by pressing want to save the detergent value . the knob .
-
Page 28: Dosing Aid / Daily Use
DOSING AID / DAILY USE Instead of adding detergent to the detergent After you have selected programme and dispenser, it can also be added directly to the options, press the “Dosing Aid” button; the drum, in a detergent ball . Dosing aid symbol lights up on the display . -
Page 29: Saving Tips
SAVING TIPS Achieve the best use of energy, water, detergent Save energy by using a 60° C instead of a 95° C and time by using the recommended maximum wash programme, or a 40° C instead of a 60° C load size for the programmes, as indicated in the wash programme . -
Page 30: Cleaning & Maintenance
CLEANING & MAINTENANCE and unplug the washing machine . WARNING Do not use flammable fluids to clean the For any cleaning and maintenance, switch off washing machine . CLEANING THE OUTSIDE OF THE WASHING MACHINE Use a soft damp cloth to clean the outer parts of Do not use glass or general purpose cleaners, the washing machine . -
Page 31: Checking The Water Supply Hose
CHECKING THE WATER SUPPLY HOSE Check the inlet hose regularly for brittleness and cracks . If damaged, replace it by a new hose available through our After-Sales Service or your specialist dealer . Depending on the hose type: For water stop hoses: check the small safety valve inspection window (see arrow) . -
Page 32: Cleaning The Mesh Filters In The Water Supply Hose
CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE Close water tap and screw off the inlet hose . Insert the mesh filter again . Connect the inlet hose to water tap and washing machine again . Do not use a tool to connect the inlet hose . Open the water tap and check that all connections are tight . -
Page 33: Cleaning The Detergent Dispenser
CLEANING THE DETERGENT DISPENSER Remove the detergent dispenser by pressing Wipe the parts dry with a soft cloth . on the release button and at the same time pulling out the detergent dispenser . Reinstall the detergent dispenser and push it Remove the insert from the detergent back into the detergent compartment . -
Page 34: Cleaning The Water Filter / Draining Residual Water
CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER If the water cannot drain, the “Water filter WARNING clogged” failure indicator lights up . Clean the water filter at least once per month, to Switch off and unplug the washing machine avoid that the water cannot drain after the wash before cleaning the water filter or draining residual due to clogging of the water filter . - Page 35 If your washing machine model has no emergency Clean the water filter: remove residues in the drain hose: filter and clean it under running water . Slowly turn the filter counterclockwise until water flows out . Let the water flow out, without removing the filter .
-
Page 36: Transport And Handling
TRANSPORT AND HANDLING Unplug the washing machine and close the water tap . Refit the transport bolts . Follow the Make sure that door and detergent dispenser instructions for removing the transport bolts in the are properly closed . Installation Guide in reverse order . Disconnect the inlet hose from the water tap, Important: Do not transport the washing machine and remove the drain hose from your draining... -
Page 37: Troubleshooting
TROUBLESHOOTING Your washing machine is equipped with various These failures are frequently so minor that they can automatic safety functions . These enable failures be removed within a few minutes . to be detected in good time and the safety system can react appropriately . - Page 38 PROBLEM POSSIBLE CAUSE SOLUTION Spin result poor Spin button was set to a low spin Select and start “Spin” programme speed . with a higher spin speed (if selectable) . Unbalance during spinning See line above . prevented final spin cycle . Excessive foam formation Start “Rinse&Spin”...
- Page 39 FAILURE INDICATORS AND MESSAGES Below is a summary of possible failure causes and solutions . If the problem persists after having removed the cause of the failure, press and hold On/Off for at least three seconds . If afterwards the failure indication still persists, close the water tap, switch off and unplug the washing machine and contact our After-Sales Service .
- Page 40 Display message Possible Cause Possible Solution The door cannot unlock . Firmly press the door on the area (or F29) of the door lock, then press On/Off for at least 3 seconds . If hot cycle is selected, wait until cool down and press again On/Off for at least 3 seconds .
- Page 41 Failure Display message Possible Cause Possible Solution indicator F20 or Failure of an electronic com- Switch off and unplug the washing machine; close the water ponent tap . Call After-Sales Service Too much laundry for a pro- Select and start programme gramme with small maxi- “Rinse and Spin”...
-
Page 42: Door - How To Open It In Case Of Afailure, To Take Out Your Laundry
DOOR – HOW TO OPEN IT IN CASE OF A FAILURE, TO TAKE OUT YOUR LAUNDRY Switch off the washing machine and unplug it . Always drain the water before opening the Close the water tap . door, either by pressing and holding On/Off Wait until the drum has stopped rotating . -
Page 43: After Sales Service
• Your full address and telephone number . For any repairs, use our authorized After Sales Service, to ensure proper repairing and use of original spare parts . Manufacturer: Whirlpool Europe s.r.l. Socio Unico Viale Guido Borghi 27 21025 Comerio (VA) Italy... - Page 44 17 mm - 0.67 inch 12 mm - 0.47 inch...
- Page 45 max 2,0 cm max 0,8 inch max 100cm / 39 inch min 60cm / 24 inch max 100cm / 49 inch min 60cm / 24 inch...
- Page 46 400011163712...