Table of Contents
Advertisement
imaging capabilities. To avoid poor image quality caused by incorrect lens selection, only use
lenses that are recommended by Avigilon for use with this camera model. For a list of lenses
recommended for use with this camera model, contact your Avigilon dealer or representative.
Note: If the lens includes a collar, the collar must be used to prevent damage to the lens mount on
the camera.
The recommended maximum weight of the lens is 1050 g (2.31 lb). Any lens that is heavier shall be
supported by a separate mounting bracket for the lens supplied by the lens manufacturer.
To mount a lens to the camera, complete the following steps:
1. Do not connect power to the camera until after the lens is mounted.
2. If the lens includes a collar, install the collar to the lens first.
3. Remove the dust cap from the lens mount.
4. Align the lens to the appropriate index marker on the lens mount (A).
Red mark: EF mount index
o
White mark: EF-S mount index
o
5. Turn the lens clockwise until it locks into place (B).
Mounting the Lens
5
Advertisement
Table of Contents
