Copy To Inverter - Toshiba RKP004Z Instruction Manual

8. Operation by a copy function

8. 2 Copy to inverter

There is no data in LCD, and copy it to LCD at the time of purchase.
(Chap.: 8.1)
Push the F3 key on an initial screen and the copy mode screen is displayed. It is not
possible to drive with the [RUN] key in the following 3～5 screen display.
1
Select the memory saving group using the
control dial.
2
Select copy direction [Copy to the inverter
memory] using the control dial.
It is not possible to copy to the inverter
when there is no information in the selected
memory. Copy to the LCD first
(ref.: Chapter 8.1).
3
Display of copy waiting
Copy starts when the [F4] key is input
4
Display of copy loading（fixed screen）
Copy finishes in 1 minute. . When the copy
is not completed even if it waits 2 minutes
or more, please reset a power supply and
copy again.
5
Display of copy finish
Return to the copy direction window
as above "2" when press the ESC key
after copy.
.
Top
［Copy to the LCD memory］
Top
Please push F4 key
when starting
Top
C o p y w a s c o m p l e t e d n o r m a l l y.
Please push ESC-key.
CRC code：6AE3
Top
8-3
Copy Mode
Group selection
Memory - A
Memory - B
Info
Copy Mode
Memory - A
Group selection
［Copy to the inverter］
Copy Mode
Memory - A
［Copy to the inverter］
Waiting
［LCD メモリへコピー］
Start
F4
Copy Mode
Memory - A
［Copy to the inverter］
Copy Mode
Memory - A
［Copy to the inverter］
Finish