Table of Contents
Advertisement
1
0
F
W
T
S
e
t
t
i
n
g
s
1
0
F
W
T
S
e
t
t
i
n
g
s
Speed Dialing
The FWT provides the speed dialing function, which is implemented by setting a
speed dialing key for some telephone number.
After you enter the "Common" interface,
1 Find [Speed Dials], and then press <OK> to enter it;
2 Find the speed dial location, and press <OK> to enter the "Edit Key X"
interface;
3 Enter the telephone number;
4 Press <OK> to save the settings.
For example, a telephone number "12345678" is set to a speed dialing key "5".
Press <5> in the FWT standby state, and then press <CALL/REDIAL>. The
FWT will switch to hands-free state and automatically dial the number
"12345678".
IP Card Calling
The FWT provides the IP card calling function. The relative information about
the IP card is pre-configured in the FWT. After the function is enabled, press
<IP> in the FWT standby state. The FWT will automatically dial out according
to the IP card information.
You must press <PAUSE> to separate each part of the IP card information. Press
<PAUSE> once, the display screen shows one "P".
After you enter the "Common" interface,
1 Find [IP Number], and then press <OK> to enter it;
2 Enter the IP card information, such as IP access code+P+user
account+P+password, and then press <OK> to save the settings.
For example, after the above setting, press <IP> in the FWT standby state. The
FWT will automatically dial the IP access code, user account, and password in
turn. Key in a telephone number after the system prompt, and then wait to
connect with the peer.
54
HUAWEI
Advertisement
Table of Contents
