Table of Contents
Advertisement
Issue
Wipeable or water-
soluble coatings in-
side the appliance
or on the door.
There are stubborn
white coatings on
the dishware, inside
the appliance or on
the door.
Tea residue or lip-
stick marks on dish-
ware.
Cause and troubleshooting
Detergent substances are deposited there. These
coatings cannot generally be removed with chem-
icals.
Change your Detergent.
▶
Clean the appliance mechanically.
▶
White coating is deposited inside the appliance.
Adjust the water softening system correctly.
1.
In most cases you will need to increase the
setting.
If necessary, change your detergent.
2.
Special salt dispenser is not screwed tight.
Screw the special salt dispenser tight.
▶
Detergent substances are deposited there. These
coatings cannot generally be removed with chem-
icals.
Change your Detergent.
▶
Clean the appliance mechanically.
▶
The hardness range is set incorrectly, or the wa-
ter hardness is greater than 62 °E (8.9 mmol/l).
Set the Water softening system to the water
▶
hardness or add special salt.
3in1/organic/eco detergent is not effective
enough.
Set the Water softening system to the water
▶
hardness and use separate detergents (name
brand, special salt, rinse aid).
Too little detergent is being used.
Increase the amount of detergent used or
▶
change Detergent .
Washing program selected too weak.
Select a more intensive washing program.
▶
Dishwashing temperature is too low.
Select a program with a higher dishwashing
▶
temperature.
Too little detergent is being used or is unsuitable.
Use a suitable Detergent and follow the manu-
▶
facturer's instructions for the amount to be
used.
Dishware has been precleaned too intensively.
The sensors then choose a weaker program.
Stubborn soiling cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse dishware.
Troubleshooting en-us
45
Advertisement
Table of Contents
