Advanced Operation 3 - Hitachi HDB60 Instruction Manual

All manuals and user guides at all-guides.com
ADVANCED OPERATION
CONFIGURING YOUR RECEIVER
Many aspects of your HDB60 receiver can be set
up to reflect your circumstances and preferences.
The Configuration menu screen is accessed from
the Main Menu. Press the [MENU] key to display the
Main Menu and the [DOWN] key twice to highlight
Configuration, then press [SELECT] to display the
Configuration menu screen.
The various configuration functions are displayed
in a list, along with a quarter-screen image of the
currently selected channel. You can select a
function by highlighting the corresponding menu line
with the [UP] or [DOWN] keys. There are seven
configuration functions.
Audio Language
Digital terrestrial television channels can broadcast
simultaneous soundtracks in more than one
language. This function selects which language
soundtrack you will hear when switching to a channel
broadcasting with multiple soundtracks. See also
Section 2 - EVERYDAY OPERATION - Audio
Control.
H i g h l i g h t t h e A u d i o L a n g u a g e l i n e i n t h e
Configuration menu and use the [LEFT] or [RIGHT]
keys to cycle through the language options.
Return No Menu to normal TV viewing by pressing
the [MENU] key.
SUBTITLE
3
Digital terrestrial television channels can broadcast
with subtitles displayed on-screen for the hard-of-
hearing. This function selects the desired subtitle
language and enables the automatic display of
subtitles whenever subtitle information is broadcast.
Highlight the Subtitle line in the Configuration menu
and use the [LEFT] or [RIGHT] keys to cycle
through the disable and language options.
Return NO MENU to normal TV viewing by pressing
the [MENU] key.
TV TYPE
Digital terrestrial television channels can broadcast
programmes in a widescreen format which must be
output differently to normal and widescreen TV sets.
This function tells the receiver the screen format of
the TV connected so that broadcasts are displayed
correctly.
Highlight the TV Type line in the Configuration menu
and use the [LEFT] or [RIGHT] keys to select 4:3
L
if you have a standard TV set connected or 16:9 if
it is a widescreen TV. This function duplicates the
selection made at the time of first installation (see
1 - PREPARATION - Tuning In) and can be used if
you change TV sets.Return NO MENU to normal TV
viewing by pressing the [MENU] key.
TV OUT
The HDB60 receiver can output either an RGB or
CVBS signal from the TV SCART on the rear panel.
Although the RGB format results in a better quality
picture, not all equipment - particularly some VCRs
- can cope with an RGB signal (see Appendix C -
Connecting A VCR).
PARENTAL SETTINGS
This function enables or disables the menu protection
system and allows the PIN code to be changed. See
3 - ADVANCED OPERATION - Channel And Menu
Protection.
- 13 -