Samsung SNH-V6430BN User Manual page 17

5.
Insert a screw in each of the 3 holes in the
wall, and tighten the screws using a Phillips
screwdriver.
6.
Connect the PoE adapter to the camera.
J
Insert the cable through the hole at
the bottom of the bracket to prevent
the cable from being pressed when
installing the camera.
Adjusting the camera angle
1. Turn the bracket knob counter-clockwise.
2. Adjust the angle adjustment hinge to set
the desired camera angle.
3.
Turn the bracket knob clockwise to
fasten.
Angle adjustment hinge
Bracket knob
02
17