Bosch UniversalBrush Original Instructions Manual page 13

Pad holder (5) with heavy-duty pad (8) (brown)
(burnt-in impurities)
– Baking trays, uncoated cooking utensils
– Ovens
Recommended Applications (Surface Material)
Surface material
Brush (3)
Hard surfaces
Coated surfaces
Fabrics
Cast iron
Ceramic, porcelain
Aluminium, metal
Plastic, laminate
Glass
Paint, rust
● = ideally suited; ○ = conditionally suited; – = not suited
Changing the cleaning adapter
– Pull the fitted cleaning adapter (brush (3), detailed
brush (4) or pad holder (5) with a suitable pad) firmly
from the holder (2).
– Insert the required cleaning adapter into the holder (2),
until it audibly clicks into place.
Changing the pad
The pad holder (5) is fitted with climbing hooks, allowing in-
dividual pads ((6), (7), (8) or (9)) to be fastened quickly
and simply.
– To remove a pad, lift it from the side and pull it off the pad
holder (5).
– Remove dirt and dust from the pad holder (5), e.g. with a
paintbrush, before attaching a new pad.
– Press the pad firmly against the bottom side of the pad
holder (5).
Operation
Starting Operation
Switching On/Off
– To switch on the power tool, press the on/off switch (1).
– To switch off the power tool, press the on/off switch (1)
again.
Bosch Power Tools
Microfibre
pad (6)
Detailed
(blue)
brush (4)
● ○
○ ○
● –
– ○
● ○
● ○
● ●
– ●
– –
Pad holder (5) with eraser melamin pad (9) (white)
(cleaning hard surfaces)
– Suitable for:
Worktops, glass surfaces, floors, skirting boards, doors,
shoes
– Not suitable for:
Surfaces made from wood, copper or stainless steel, non-
stick coatings, car paints
Cleaning adapter
Kitchen pad (7) Heavy-duty
(green) pad (8)
(brown)
– –
– –
– –
● ●
○ –
– –
– –
○ –
(Only tempered
glass)
○ ●
Working Advice
The cleaning performance is primarily determined by the
choice of cleaning adapter and the contact pressure.
Only cleaning adapters in perfect condition will deliver good
cleaning performance and protect the power tool.
Be sure to apply consistent contact pressure in order to in-
crease the service life of the cleaning adapters.
Excessively increasing the contact pressure will not lead to
increased cleaning performance, but to more severe wear of
the power tool and of the cleaning adapter.
Use only original Bosch accessories.
u
Cleaning surfaces
– Protect the surroundings of the area to be cleaned from
spray using suitable covers.
– Moisten the bristles or the pad with a suitable liquid, gel-
like or powdery cleaning agent.
or
Spray the surface to be cleaned directly with a spray
cleaner.
– First position the power tool on the surface to be cleaned
and then switch on the power tool.
This prevents spray.
– Move the power tool slowly, in a circular motion and
without exerting pressure on the surface to be cleaned.
English | 13
Eraser melamin
pad (9)
(white)
●
●
○
–
–
–
○
●
–
1 609 92A 84X | (08.07.2022)