Program Tracks - Philips AZ1852/61 User Manual

Program tracks

You can program a maximum of 20 tracks.
1 In CD/USB mode, at the stop position, press PROG to activate the
program mode.
[PROG] (program) starts to blinks.
»
2 For MP3/WMA tracks, press AL-/AL+ to select an album.
3 Press
/
4 Repeat steps 2 to 3 to program more tracks.
5 Press
During play, [PROG] is displayed.
»
•
To erase the program, in the stop position, press
•
To review the program, in the stop position, press and
hold PROG for more than 2 seconds.
General information on cassette recording
a
•
Recording is permissible insofar as copyright or other
rights of third parties are not infringed.
•
This deck is not suitable for recording on CHROME
(IEC II) or METAL (IEC IV) type cassettes. For recording
you should use NORMAL type cassettes (IEC I) on which
the tabs have not been broken.
•
Check and tighten slack tape before use with a pencil to
avoid jamming the deck mechanism.
•
The volume level is set automatically.
Tip
•
–No recording at beginning 7 seconds.
•
–Break safeguard tab to prevent the accidental erasure of a
recording.
20
to select a track number, then press PROG to confirm.
on the main unit to play the programmed tracks.
.