4.3
Ending use of the detector
Information
When the detector will not be used for some time, remove the battery pack.
Otherwise, overdischarge may occur, leading to a shorter battery life.
1
Turn off the detector.
Press and hold the POWER switch (approx. 3 seconds).
The Power LED is off.
2
Remove the battery pack.
i)
Remove the battery cover.
ii)
Remove the battery pack.
• Insert your fingers into the slot of the
battery pack bay to grip the battery
pack edge, and then pull the edge to
remove the battery pack (
iii)
Attach the battery cover.
).
4
Operating procedures
35