Basic Operations; Power On And Standby; Turning The Display On; Putting The Display To Standby - Philips 32PF1700T/96 Installation And Operation Manual

32PF1700T_96_EN.book Page 10 Thursday, April 26, 2007 3:57 PM

Basic operations

Power on and standby

Turning the display on

After plugging the display's power cable into a wall outlet and turning on the
main power switch, the display will enter standby mode automatically. The
power indicator will light up red. Press
The display will turn on and the power indicator will change to green.

Putting the display to standby

Press (Power/standby) on the display again, and the display will return to
standby mode. The power indicator will turn red.
The display still consumes a very small amount of power (about 1W) in
standby mode.

Adjusting sound

Adjusting speaker volume

• Press VOL (Volume)
indicator increases in length as volume rises.
• Press VOL (Volume)
indicator decreases in length as volume falls.
Basic operations
10
(Power/standby) on the display.
on the display to increase volume. The volume
on the display to decrease volume. The volume