Page 1
Register your product and get support at www.philips.com/welcome EN User manual DA Brugervejledning DE Benutzerhandbuch EL Εγχειρίδιο χρήσης ES Manual del usuario Käyttöopas FR Mode d’emploi Manuale utente NL Gebruiksaanwijzing NO Brukerhåndbok PT Manual do utilizador SV Användarhandbok TR Kullanım kılavuzu...
Contents Help and support Tutorials FAQs Contact Philips Notice Compliance Mains fuse Trademarks Important Safety Care for your product Care of the environment Your SoundBar Main unit Remote control Connect your SoundBar Subwoofer Connectors Connect to TV Connect to other devices through HDMI...
SoundBar, or void your warranty. Contact Philips If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Note the numbers before you call Philips: Model No.
Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.
• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. • Parts of this product can be made of glass. Handle with care to avoid injury and damage.
Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www. philips.com/welcome. Main unit SOURCE Select an audio source for the SoundBar. (Standby-On) • Switch the SoundBar on or to standby.
Page 8
HDMI SOURCE Switch your audio source to the HDMI connection. DOCK for iPod Switch to Philips dock for iPod or iPhone. Navigation buttons ( Navigate menus. Confirm an entry or selection. SOUND SETTINGS Access or exit sound options. Dock for iPod/iPhone buttons •...
TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. For a comprehensive interactive guide, see www.connectivityguide.philips.com. Note • For identification and supply ratings, refer to the type plate at the back or bottom of the product.
TO TV-HDMI OUT (ARC) Connect to the HDMI input on the TV. DOCK for iPod Connect to a Philips dock for iPod or iPhone.(Model: Philips DCK3060). AUDIO IN-AUX Connect to an analog audio output on the TV or an analog device.
Option 2: Connect to TV through an analog audio cable If your TV does not have HDMI connectors, connect your SoundBar to the TV through an analog audio cable connection. Using an analog cable, connect AUX connectors on your SoundBar to the audio connectors on the TV.
Connect audio from TV and other devices Play audio from TV or other devices through your SoundBar. Use the best quality connection available on other devices. Note • The audio connections in this user manual are only recommendations. You can use other connections too.
Set up audio for connected devices When you connect a device to your SoundBar, check the audio settings. On your TV and other devices, turn on HDMI-CEC. For details, see the user manual of the TV and the other device. Select ‘Amplifier’...
Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices.
Press the buttons on the MP3 player to select and play audio files or music. iPod or iPhone When you connect a Philips dock for iPod/iPhone, you can use the SoundBar to play music, movies and photos from your iPod or iPhone.
» The picture is displayed on the TV. EasyLink The SoundBar supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control.
Page 17
Control devices Control the SoundBar and the other connected HDMI-CEC compliant devices with a single remote control. One-touch standby When you press and hold (Standby) on the remote control, the SoundBar and all the connected HDMI-CEC devices (that support one-touch standby) switch to the standby mode.
Change settings This section helps you to change the settings of your SoundBar. Caution • Most of the settings are already configured with the best value for your SoundBar. Unless you have a reason to change a setting, it is best to leave it at the default value.
Before you mount your SoundBar to the wall or onto a single stand, read all safety precautions (see ‘Safety’ on page 5). If you have any query, contact Philips Consumer ) to Care in your country. Wall mount Screw length/diameter...
Stand for SoundBar and TV - STS1100/STS1300 If you have a Philips TV, you can mount your SoundBar and the TV onto a single stand. Purchase the STS1100 or STS1300 stand from an authorized Philips dealer. For instructions on how to install the stand with the SoundBar and Philips TV, see the stand quick start guide.
Page 21
If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. Main unit The buttons on the SoundBar do not work. •...
Page 22
EasyLink does not work. • Make sure that the SoundBar is connected to a Philips brand EasyLink TV, and the EasyLink option is turned on (see ‘Switch on’ on page 16). Cannot play video or photos from an iPod or iPhone on the TV.