Dnd (Do Not Disturb); Save And Repeat A Number - NEC UNIVERGE SV9300 Series User Manual

DND (DO NOT DISTURB)

This feature restricts incoming calls to a terminal.
This feature is set by Soft key or feature key. The
feature key is set by system data setting at initial
installation. For details, please contact the system
administrator.
TO SET DND
1.
Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Press Soft key (>>>>) when Soft key is used.
3.
Press Soft key (DND) or DND feature key.
You will receive a service set tone.
4.
Press Speaker key
Speaker key lamp goes off.
Line key lamp goes off.
TO CANCEL
1.
Press Speaker key.
Call Indicator Lamp goes off.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Press Soft key (>>>>) when Soft key is used.
3.
Press Soft key (DND) or DND feature key.
You will receive a service set tone.
4.
Press Speaker key
Speaker key lamp goes off.
Line key lamp goes off.
FEATURE OPERATION

SAVE AND REPEAT A NUMBER

This feature allows a terminal to save a specific dialed number
and then redial that number.
This feature is set by Soft key or feature key. The
feature key is set by system data setting at initial
installation. For details, please contact the system
administrator.
Up to one Save and Repeat feature keys can
be assigned per terminal.
TO SET SAVE AND REPEAT
1.
Dial the desired number and press Soft key
(S&R) or Save and Repeat feature key
HOW TO DIAL BY SAVE AND REPEAT
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Press Save and Repeat feature key.
The terminal automatically redials the programmed
number.
Example: "04XXXXXXXX" is programmed number.
3.
Lift the handset to start a conversation.
Speaker key lamp goes off.
Redialing the same number is possible until
new number is registered by this feature.
54