Docking Light Switch (195S); Switch Circuit Breakers; No-Wake Mode / Cruise Assist Switch - Yamaha 195S 2021 Owner's/Operator's Manual

Docking light switch (195S)

Push this switch to turn on the docking lights
at the bow on the port and starboard sides of
the boat.
1 Docking light

Switch circuit breakers

The electrical circuit for each switch is pro-
tected by a circuit breaker. If the button pops
out, push it back in with your finger. If it pops
out again, ask a Yamaha Boat Dealer to in-
spect the electrical system.
BLOWER
1
1 Switch circuit breaker
Instrument operation
CTSY
LIGHTS
1
1 Switch circuit breaker
1

No-wake mode / cruise assist switch

This switch activates and sets the no-wake
mode, cruise assist, and reverse RPM con-
trol.
CTSY
LIGHTS
1 No-wake mode / cruise assist switch
To operate the no-wake mode and cruise as-
sist, see the following sections. To activate
the reverse RPM control, see "Reverse RPM
control" on page 45.
Operating the boat with a minimal wake
(no-wake mode)
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake.
This is especially convenient when traveling
in harbors, channels, or other areas posted
with low speed limits as "no wake zones".
NAV/ANC BILGE HORN
1 1 1
NAV/ANC BILGE HORN
1
43