Husqvarna BMC 335 Operator's Manual page 18

1. Set the switch for direction of rotation of the drum
motor (A) correctly:
C A B
a) For standard operation with diamond blades, set
the direction of rotation to counterclockwise.
b) If the product is used as a scarifier, set the
direction of rotation to clockwise.
2. Set the switch (B) in the position for forward
operation.
WARNING:
forward operation only. Do not move the
product rearward when the tool drum is
in operation.
3. Push the start button for the drum motor (C).
4. Push the lift lever (D) forward to lower the tool drum.
D
5. During operation, monitor the ammeter (E) during
the operation. The maximum amperage for each
motor type is as follows:
a) For motor type 3x400V, 50 Hz: 27.4 A.
b) For motor type 3x480V, 60 Hz: 23.4 A.
18
This product is for
0 RPM
15 Amp
E
6. Steer the product with the joystick (F).
To start and stop the cruise control
function
The cruise control function can be started and stopped
during operation with the remote control.
1. Set the applicable operation speed.
2. Push the cruise control button (A). The display (B)
shows "DRIVE" as an indication that cruise control is
on and the product moves at the set speed.
0 RPM
15 Amp
DRIVE
B
A
F
1816 - 001 - 05.04.2022