Commissioning Fire Extinguishing Devices (Standard); Commissioning The Fire Alarm Control Panel (Standard) - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
4.5 Commissioning Fire Extinguishing Devices
(Standard)

4.5.1 Commissioning the Fire Alarm Control Panel (Standard)

Prerequisites
Initial configuration parameters have been set for the fire alarm control panel
before delivery and do not need to be set onsite.
Preparations
Tools: none
Documents required: power supply and distribution system diagram, documents
delivered with the fire alarm control panel, fire extinguishing system conceptual
diagram (standard), fire extinguishing device layout diagram (standard)
Skill requirement: fire engineer
Procedure
Step 1 Switch on the input power circuit breaker of the fire alarm control panel for the
protected area by referring to the power supply and distribution system diagram.
Step 2 Switch on the active and standby power supplies to power on the fire alarm
control panel.
Figure 4-3 Positions of power switches
Issue 01 (2021-04-20)
NO TE
For the diagrams, see the initial configuration parameter manual for the solution in use.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning Core Devices
35