A Board And Antenna Removal; A Board Battery Replacement; Button Bracket Removal; Speaker Bracket And Speaker Removal - Sony HID-C10 Service Manual

1-3. A BOARD AND ANTENNA REMOVAL

A Remove 3 Screws, +PSW M3X8
B Carefully lift out A Board so you don't pull on the anntena wire.
C Remove 2 Screws, +BVST 3X10 to detach the shield.
D Carefully lift out shield and detach the anntena from the Rear Cover.
A
B

1-3-1. A BOARD BATTERY REPLACEMENT

A For battery replacement part number information, refer to Section 3: Electrical Parts List.
CAUTION:
The battery used in this board MUST adhere to the following:
BATTERY MUST BE REPLACED WITH THE SAME OR EQUIVALENT TYPE
BATTERY MUST BE INSERTED INTO THE BOARD EXACTLY AS SHOWN IN THIS SERVICE
MANUAL
Failure to follow these instructions may present a risk of fi re or explosion.
BATTERY, LITHUM
( CR2032L/HFN)
HID-C10

1-4. BUTTON BRACKET REMOVAL

C
D

1-5. SPEAKER BRACKET AND SPEAKER REMOVAL

A From under A Board, gently lift 2 tabs out of slots.
B Pull Button Bracket away from A Board.
A
A Remove 2 Screws, +BVST 3X10
B Lift Speaker Bracket out of Rear Cover.
C Pull Speakers out of Speaker Bracket.
A
B
B
C
LONG WIRE
SHORT WIRE
HID-C10
C
9