Maintenance And Cleaning - GE Truvitals TM3000 User Manual

Truvitals Non-Touch 2-in-1 Thermometer
NOTE: In case of error code, refer to the chart on page 13.
Maintenance & Cleaning
Battery Replacement
When the batteries need to be
replaced, a blinking low battery icon
will display on the screen. To change
the batteries, follow the steps below.
1. Slide the battery cover down to
open the battery compartment.
2. Remove the old batteries and
dispose of them properly.
3. Insert two (2) new batteries
aligning them with the polarities
shown in the battery compartment.
4. Slide the battery cover back into
place before powering on the
thermometer.
NOTE: Remove the batteries if the
thermometer will not be in use for
more than three (3) months.
12
5. Hold the thermometer 1-2 in.
(3-5 cm) from the object's
(60s)
surface you wish to measure
and press the measure
button.
User Guide | Error Codes